American Veneer Wenge Fleece Back Edgebanding gives you Wenge veneer in an edge band format, so you can finish exposed edges on panels and components with a surface that matches Wenge-faced work. The edge banding is manufactured by American Veneer Technologies, so the product lines up with a known veneer supplier used in woodworking shops. This edge banding is classified as Edge Banding in the Edgebanding & Surfacing category, keeping it in the same product family as other professional surfacing materials. The product name specifies fleece back construction, which supports bonding the veneer edge to substrates in common woodworking workflows. The description specifies Wenge, so the banding presents a Wenge veneer surface along the edge where it is applied. The stated width of 15/16 inch lets you cover typical 3/4 inch panels while still trimming back to a clean line on both faces.
This Wenge fleece back edgebanding is identified with a 15/16 inch width, which lets the material extend slightly past both faces of typical 3/4 inch substrates before trimming. That extra width helps installers cut back to a clean, straight line without exposing core material. The product class of Edge Banding confirms its role as the finishing layer on raw edges of boards, shelves, and fronts. Because the banding is Wenge veneer with a fleece back, it integrates into workflows where Wenge is already used as the visible surface. The defined width and backing type support repeatable setup of edge-banding equipment and trimming tools around this specific size.
The American Veneer Wenge Fleece, Back Edgebanding 15/16 inch Width is suited to jobs where exposed board edges need to align visually with Wenge-faced components. The Wenge veneer description means the material presents Wenge along cabinet sides, shelves, and fronts once applied. With its 15/16 inch width, the banding covers standard 3/4 inch edges in cabinet and furniture construction while still leaving enough material for trimming. The Edge Banding product class ties it directly to tasks like finishing raw panel edges in casework, built-ins, and custom millwork using Wenge as a design element. In these applications, a fleece backed veneer edge band provides an applied edge that reads as Wenge, supporting a consistent appearance across the entire assembly.
The stated 15/16 inch width gives installers a predictable dimension for setup on edge-banding equipment and manual jigs, which supports consistent registration of the banding to the workpiece. Because the product is defined as Wenge Fleece, Back Edgebanding, the backing type is integrated into the product identity, indicating that the veneer face and fleece back work together as a single edge treatment. This pairing simplifies selection when specifying a Wenge veneer edge in shop lists. The manufacturer part number VR-WENGQ1516-500 links the Wenge species and 15/16 inch width in one identifier, which helps during reorders and job documentation. Being described within the Edgebanding & Surfacing category, this edge banding can be planned together with other surfacing materials so edge treatment follows the same Wenge theme as flat panels.
The American Veneer Wenge Fleece, Back Edgebanding is specified at 15/16 inch width, giving enough overhang on 3/4 inch panels for trimming to a clean finished edge.
The product is classified as Edge Banding in the Edgebanding & Surfacing category, so it is intended specifically for finishing exposed panel edges in woodworking projects.
This edgebanding is from American Veneer Technologies, which positions it within a dedicated veneer product line used by woodworking professionals.
The product name specifies fleece back, indicating the Wenge veneer has a fleece backing layer that supports bonding the banding to panel edges during installation.
The web description identifies the material as American Veneer Wenge, so the visible face of the edge banding presents Wenge along the edge after trimming.
The manufacturer part number VR-WENGQ1516-500 ties together the Wenge species, quarter cut reference, fleece back, and 15/16 inch width for clear specification and reordering.
The American Veneer Wenge Fleece, Back Edgebanding 15/16 inch Width offers a Wenge veneer edge solution aligned with professional Edgebanding & Surfacing products from Wurth Baer Supply. The defined 15/16 inch width supports efficient trimming on standard 3/4 inch panels. The Wenge veneer face and fleece back construction together provide a dedicated edge treatment that keeps the visible edge consistent with Wenge-faced components. For projects built around Wenge surfaces, this edge banding lets you specify and repeat a known manufacturer part number, VR-WENGQ1516-500, across drawings, cut lists, and shop orders.
Sold In: 1 Roll