American Veneer Ash edgebanding fleece is an Ash wood edge banding from Cedan Inc designed to finish exposed edges on wood-based panels. The 7/8 inch width gives coverage for standard sheet thicknesses with a small overhang, which supports flush trimming without starving the edge. The Ash veneer face provides a real-wood Ash appearance on the edge, keeping grain and color consistent with Ash components in the same run. The fleece backing sits between the Ash veneer and the bonding surface, helping the banding conform to minor panel variation and support adhesive bond strength during application. As an edge banding in the Edgebanding & Surfacing, Edgebanding, Wood class, it fits directly into typical cabinet, fixture, and furniture workflows that call for wood edgebanding instead of PVC or melamine.
The 7/8 inch Ash edgebanding width provides extra coverage beyond typical panel thickness, which allows installers to apply the banding, then trim top and bottom back to the panel for a flush, square edge. The Ash veneer face is intended to cap exposed edges on Ash-faced or Ash-compatible panels, so the trimmed edge reads as a continuation of Ash grain rather than a core exposure. The fleece backing sits against the prepared substrate, giving the veneer support across the glue line, which benefits bond strength and helps the edge resist minor telegraphing from the panel surface.
This American Veneer Ash edgebanding fleece is an Ash edge banding intended for finishing exposed edges on panels used in cabinetry, furniture, and general woodworking where Ash is the visible species. The 7/8 inch width suits edging for cabinet sides, shelves, tops, and door blanks where a modest overhang is preferred for trimming. The Ash veneer surface lets fabricators carry Ash appearance from faces around to edges, supporting a continuous look on casework and built-ins. As a wood edgebanding product in the Edgebanding & Surfacing, Edgebanding, Wood category, it integrates with shops already set up to work with veneer edge materials. The Cedan Inc brand and AEASH78-500 identifier tie this edgebanding to a defined Ash specification, which supports consistent material selection across multi-room or repeat programs.
The 7/8 inch width on this Cedan Ash edge banding offers installers working margin for trimming operations, supporting clean, repeatable edges along long cabinet runs or shelving. The fleece back construction places a textile-like layer behind the Ash veneer, which supports the veneer during bonding and trimming, helping the edge stay flat against the substrate. The Ash veneer face provides a real-wood edge that sands and finishes in line with Ash components, which helps finishing processes treat the edge and face together without introducing a dissimilar material. With a clear part reference in AEASH78-500, shops can tie cutlists and job packets to a specific Ash edgebanding, which supports controlled material flow and straightforward reordering when matching prior work.
The American Veneer Ash edgebanding fleece has a 7/8 inch width, giving enough overhang on typical panel thicknesses to trim back to a clean, flush Ash edge during fabrication.
The American Veneer Ash edgebanding fleece uses an Ash veneer face, so the visible edge reads as real Ash wood and aligns with Ash components in the same project.
The American Veneer Ash edgebanding fleece uses a fleece backing under the Ash veneer, supporting adhesive bonding and helping the banding sit smoothly on the substrate.
The American Veneer Ash edgebanding fleece is produced by Cedan Inc, giving shops a branded Ash edgebanding source for repeat work.
The American Veneer Ash edgebanding fleece is in the Edge Banding product class within Edgebanding & Surfacing, fitting standard wood edgebanding workflows.
The American Veneer Ash edgebanding fleece uses manufacturer part number AEASH78-500, which ties job documentation directly to this specific Ash edgebanding.
The American Veneer Ash edgebanding fleece 7/8 inch width from Cedan Inc gives shops an Ash veneer edge banding with fleece backing in a size aimed at clean trimming. For cabinet, furniture, or interior millwork runs using Ash, aligning edges to this AEASH78-500 specification supports consistent appearance and straightforward repeat projects.
Sold In: 1 Roll