American Veneer Fir Edgebanding Fleece 7/8" Width provides a wood edgebanding solution built from American Veneer Fir, so cabinet and casework projects present a real-wood edge that visually matches Fir components. The Fir species base ties edge detail back to American Veneer Fir faces, which helps maintain material consistency around door, panel, or shelf perimeters. The 7/8" width gives coverage beyond most standard panel thicknesses, allowing trimming back to a crisp line after bonding. The fleece back construction on this edgebanding establishes a bonding surface tailored for adhesive contact, supporting dependable grip along the substrate edge. This product is classified as Edge Banding under the Edgebanding, Wood category, so it fits wood-based finishing workflows where exposed board edges need a matching Fir veneer finish.
This American Veneer Fir edgebanding in 7/8" width gives fabricators working room when applying to edge substrates, because the strip extends beyond typical board thickness for subsequent trimming. The vertical grain pattern along the length of the band supports alignment with door or panel grain direction, which keeps the finished edge visually tied into the overall Fir layout. The fleece back construction defines the glue-facing side of the band, simplifying orientation during application. As a wood Edge Banding from Cedan Inc, this Fir product fits into standard woodworking edge-finishing processes where veneer edge treatment is required on cabinet, fixture, or furniture components.
As a wood Edge Banding in the Edgebanding, Wood category, American Veneer Fir Edgebanding Fleece 7/8" Width is suited to projects that use Fir-faced materials and require exposed edges to present the same species. The American Veneer Fir surface allows door, panel, or carcass edges to visually connect to American Veneer Fir faces, which is especially relevant on cabinetry, millwork, and custom furniture using Fir as the visible material. The 7/8" width works well on panel-based construction where one pass can cover the full thickness, and the Cedan Inc branding provides a consistent source reference when specifying materials for repeated shop builds or coordinated project sets.
The vertical grain designation on this Fir edgebanding means the grain runs along the strip length, helping installers line the band with the dominant grain direction on vertical cabinet or panel edges for a uniform appearance. The fleece back on the underside of the band creates a defined bonding interface, which supports adhesive wet-out along the length of AEFIR78-500 and helps maintain an even bond line from end to end. The 7/8" width gives tolerance on both sides of standard panels so trimming tools can work without exposing the core, supporting repeatable flush results. Together, these defined attributes - American Veneer Fir species, vertical grain orientation, fleece back, and controlled width - provide a consistent Fir edge solution for shops standardizing on this Cedan Inc Edge Banding.
The product uses American Veneer Fir as the edgebanding material, so finished edges present a genuine Fir veneer that visually relates to American Veneer Fir panels or components in the same project.
The American Veneer Fir Edgebanding Fleece 7/8" Width has a 7/8" width, providing extra coverage past common panel thickness so edges can be trimmed back to a clean, flush finish on both faces.
The fleece back on this Fir edgebanding forms a backing surface intended for adhesive bonding, promoting consistent glue contact along the strip to support an even, secure edge bond.
The vertical grain description indicates the Fir grain runs along the length of the edge banding, supporting a straight, linear appearance on cabinet or panel edges that coordinates with vertical Fir grain layouts.
The AEFIR78-500 manufacturer part number uniquely identifies this Fir vertical grain fleece back edgebanding, which supports accurate reordering and material matching for repeat jobs or extensions.
This Fir edgebanding is classified as Edge Banding in the Edgebanding, Wood category, aligning it with wood-based edge finishing components used in cabinet, millwork, and furniture production.
American Veneer Fir Edgebanding Fleece 7/8" Width from Cedan Inc offers a defined combination of American Veneer Fir material, vertical grain, fleece back, and 7/8" width under part number AEFIR78-500. These attributes support consistent edge finishing when projects call for Fir-faced components with matching wood edges. For shops building with American Veneer Fir, this Edge Banding provides a clearly specified option that ties edge appearance, grain direction, and bonding surface into a single product choice from Wurth Baer Supply.
Sold In: 1 Roll