Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
American Veneer White Pine Edgebanding gives sheet goods a matching white pine edge so panels read as solid wood, which helps finished cabinets and fixtures present as a unified surface. The fleece back construction on this edgebanding provides a stable backing layer that supports adhesive bonding along the full length of the edge, which matters when you want consistent hold across multiple panels. This edge banding has a 15/16 inch width, so it covers standard panel thickness edges with a bit of margin to trim, which helps installers flush-trim cleanly without exposing the core. As an edge banding in the wood category, it is suited to applications where a real wood look is required, which benefits shops that need a white pine appearance without handling solid lumber on every edge. The product is manufactured by Cedan Inc, giving buyers a defined source and part reference for repeat jobs.
This American Veneer White Pine Edgebanding Fleece 15/16 inch width is sized to cover the face of typical sheet-goods edges with a slight overhang, which helps during installation by allowing a controlled trim back to the panel face. As an edge banding in the wood class, it is intended for use along exposed edges of suitable panels where a white pine appearance is needed, which keeps the finished profile visually consistent with the panel surface. The fleece back construction provides a backing surface along the length of the strip, supporting adhesive application during standard edge banding workflows and helping installers achieve an even bond line. Because the product identity and part number specify white pine and fleece back at 15/16 inch width, it gives shops a clear reference when matching previous work or planning consistent edge treatment across a project.
American Veneer White Pine Edgebanding is positioned for applications where a white pine edge is required to visually finish the sides of appropriate panels, which helps casework and fixtures present a continuous wood appearance. As a wood edgebanding product, it matches projects that are already based on wood or wood-veneered surfaces, aligning the edge treatment with the face material for a unified look. The 15/16 inch width supports use on panel edges sized near common thicknesses, giving fabricators some working margin so cut edges, minor out-of-square conditions, or modest variations in panel thickness can still be covered and trimmed back. Because the web description and SAP description both specify white pine and fleece back, this product fits jobs that call out that particular appearance and backing construction in project notes or internal standards.
The fleece back design on this white pine edgebanding provides a defined backing layer behind the wood face, which supports adhesive distribution along the edge and promotes even contact during pressing. This backing structure can help reduce voids along the bond line because the surface presented to the adhesive is consistent, which is important when multiple identical panels are run through the same edging process. With a 15/16 inch width, installers gain a repeatable allowance to trim after bonding, which supports more uniform results across panels as the same trimming sequence can be applied without worrying about insufficient coverage. The defined manufacturer part number AEPINE1516-500 and Cedan Inc branding help shops document exactly which edgebanding was used, which supports consistent future production runs and simplifies matching edges during later additions or repairs on the same job.
American Veneer White Pine Edgebanding is listed under edgebanding and surfacing, wood edgebanding, which means it is positioned for wood-based edge treatment in cabinetry and woodworking projects needing a wood appearance.
American Veneer White Pine Edgebanding has a 15/16 inch width, giving coverage beyond typical panel thickness so installers can bond and then trim it flush to the panel face.
The fleece back on this white pine edgebanding provides a backing layer that supports adhesive bonding along the edge, which helps achieve a consistent bond line during standard edgebanding workflows.
This white pine wood edge banding is manufactured by Cedan Inc, giving shops a clear brand reference when specifying or reordering the same edgebanding for future work.
The manufacturer part number for this American Veneer White Pine Edgebanding Fleece 15/16 inch width is AEPINE1516-500, which supports accurate identification in shop documents and purchasing systems.
The white pine appearance on this edgebanding lets exposed panel edges visually match white pine-based designs, helping cabinets and fixtures maintain a continuous, coordinated wood look across faces and edges.
American Veneer White Pine Edgebanding Fleece 15/16 inch width offers a defined white pine look with a fleece back construction and wood edgebanding classification, which aligns it with cabinetry and woodworking projects built around wood-faced panels. The Cedan Inc branding and AEPINE1516-500 part number give fabricators a clear, repeatable choice when specifying edge treatment for current and future runs that require the same appearance. For shops planning projects around a white pine visual with controlled edge coverage, this edgebanding provides a focused option that ties panel faces and exposed edges into one continuous presentation.
Sold In: 1 Roll