Celadon edgebanding PVC .018 defines this Rehau, Inc. edge banding as a dedicated solution for finishing exposed edges, so cabinet and furniture projects gain a consistent Celadon color along every run. The .018 inch thick PVC construction creates a slim edge profile that follows sheet goods closely, which helps projects maintain a flush, low-build look at doors, drawer fronts, and casework ends. The 15/16 inch width gives coverage across common panel thicknesses while leaving room for trimming, supporting a uniform reveal after edge trimming passes. With a 600 FT length, this roll supports longer production runs and repeat work in the same Celadon color, which simplifies material planning across multiple cabinets or matching projects. The edge banding is part of the Edgebanding & Surfacing product group, so it fits naturally into workflows that coordinate surfaces and edges in a single Celadon tone.
The .018 inch thick PVC profile influences trimming and flushing steps, because the thin material transitions smoothly to the panel face with light passes from edge trimmers or hand tools. The 15/16 inch width affects setup at the edgebander, giving enough overhang to register cutters without excessive waste along the edge. The 600 FT length means the same Celadon edgebanding can run across many edges before changing rolls, which supports steady machine settings and consistent feed conditions from piece to piece. As an Edgebanding & Surfacing product, this PVC edge banding integrates into workflows that coordinate sheet surfacing and edge finishing, aligning material selection with established shop processes.
This Celadon edgebanding, PVC .018 inch thick and 15/16 inch wide, works as an edge finishing material for panel-based woodworking such as casework, cabinetry, and furniture components. Its 600 FT roll length supports sequences of parts that repeat the same Celadon edge tone, which is useful when multiple cabinets, doors, or panels share a coordinated color scheme. Being classified as Edge Banding within the Edgebanding & Surfacing category clarifies its role as the material applied to raw panel edges, so shop workflows can assign it specifically to banding operations rather than surface lamination. The defined Celadon color helps projects tie vertical and horizontal edges into a unified visual layout, especially where exposed edges run alongside matching surfaces.
The .018 inch thickness from the SAP description and web description supports predictable trimming response, because the thin PVC removes quickly and leaves a subtle transition that is less prone to a noticeable step at the edge. The 15/16 inch width gives a known amount of overhang relative to typical sheet materials, which helps operators standardize edgebander settings and trimming paths over multiple jobs using the same stock size. The 600 FT length contributes to repeatability by running many parts from one roll, reducing color variation within a project where every Celadon edge should match. The specific manufacturer part number 301574-496 lets shops document the exact edgebanding used, so future jobs that reference the same part number can replicate edge appearance and material behavior across new runs or replacement pieces.
The Celadon edgebanding is .018 inch thick and 15/16 inch wide, which gives a slim profile with enough width to cover panel edges and leave material for trimming during edge finishing.
The Rehau, Inc. Celadon PVC edge banding roll is 600 FT long, supporting longer production runs and repeat cabinet or furniture projects using the same color and specification.
This Celadon edge banding is made from PVC, which provides a defined profile for trimming and a consistent surface appearance along finished panel edges in woodworking applications.
The .018 inch thickness keeps the PVC layer thin, so trimming tools remove excess quickly and leave a subtle transition from edge banding to panel face on cabinet parts.
The 301574-496 identifier is the manufacturer part number for this Celadon PVC edge banding, tying jobs to a specific thickness, width, length, and color specification.
The 15/16 inch width covers common panel edges with some overhang, which allows trimming tools to track reliably and produce straight finished edges on cabinets and furniture.
The Celadon edgebanding, PVC .018 inch thick and 15/16 inch wide in a 600 FT roll, gives woodworking shops a defined edge solution for Celadon-tone projects. As Edge Banding from Rehau, Inc., it fits into Edgebanding & Surfacing workflows that depend on consistent material specifications. Using the 301574-496 part number ties cabinet and furniture runs to the same thickness, width, length, and color, which supports repeatable results across initial builds and later work using the same Celadon edge.
Sold In: 1 Roll