Edgebanding PVC Gaphite .018 Thick 15/16 Width x 600 FT describes a PVC edge banding designed to cover and finish exposed edges on panels. The 15/16 inch width gives coverage across common 3/4 inch panel edges, providing slight overhang for trimming to a flush, professional edge. The .018 inch thickness creates a slim edge profile that blends with panel faces without adding bulk in tight reveals. The PVC material forms a continuous edge surface that hides raw substrate and cut marks, helping panels present a uniform, finished look. The gaphite color provides a consistent tone along the edge, supporting visual continuity with matching or coordinating surfaces. The 600 FT length on this product allows extended runs of edge work from a single roll, which supports production workflows where multiple cabinets, shelves, or panels use the same color and size.
This edge banding uses a 15/16 inch width that gives coverage beyond typical 3/4 inch panels, which supports alignment during application and allows trimming back to a precise finished edge. The .018 inch thickness works well where a slim edge is preferred, helping the band sit close to the panel face and reducing the edge line profile. The 600 FT length provides a continuous supply from one roll, which is useful when setting up edging equipment or handheld tools for repeat applications on multiple parts. The PVC material format suits common edge banding processes where a flexible strip is applied along straight or gently curved panel edges.
This product is identified as Edgebanding, PVC Gaphite .018 Thick, 15/16 Width x 600 FT, positioning it for covering exposed edges on panels in cabinet, furniture, or casework builds that match this size. The 15/16 inch width aligns well with edging tasks on panels near 3/4 inch thickness, giving enough lateral coverage to allow precise trimming after bonding. The .018 inch thickness supports applications where a lean edge is preferred, such as doors, drawer fronts, or shelving where a subtle edge transition is desired. The gaphite color tone suits projects that specify this shade for panel edges, letting the edge visually coordinate with surfaces that are designed around a graphite-style color. The extended 600 FT length favors shops or installers who expect repeated use of this exact size and color across several cabinets, banks of shelving, or matching units.
The 15/16 inch width works with standard edge banding tools by offering a modest overhang on 3/4 inch panels, which helps installers maintain alignment during feed and then trim back to a flush, straight edge. The .018 inch thickness creates an edge that transitions closely to the panel face, which can reduce the amount of sanding or finishing work needed at the edge line. The PVC composition provides a uniform strip that follows the edge of the substrate, helping conceal exposed core material and saw cuts with a single, continuous surface. The gaphite color delivered along the full 600 FT roll helps each finished edge in a run match the next, which supports visual consistency when doors, drawers, and panels are aligned side by side. The combination of width, thickness, and length in this Rehau, Inc. edge banding is designed to support repeatable, efficient edging processes where the same specification is used across multiple parts.
The edge banding is 15/16 inch wide and .018 inch thick, which supports edging work on panels around 3/4 inch thick while keeping a slim edge profile.
The roll length is 600 FT, allowing extended edging runs and repeated use of the same size and gaphite color across multiple panels.
The edge banding is made from PVC, providing a flexible strip that covers raw panel edges with a continuous finished surface.
The .018 inch thickness keeps the edge relatively thin, helping the band sit close to the panel face and reducing the visual and tactile edge line.
The 15/16 inch width provides coverage past a 3/4 inch panel edge, giving working margin for aligning the strip and trimming to a clean, flush edge.
The gaphite color creates a consistent tone along the edge, supporting visual coordination with panels or components designed around this shade.
This Rehau, Inc. edge banding in gaphite color, sized at 15/16 inch wide by .018 inch thick in a 600 FT length, provides a defined specification for panel edge finishing. The combination of width, slim thickness, and extended roll length supports efficient edging on projects that call for this color and dimension, from cabinet runs to casework. Select this PVC edge banding when panel thickness, desired edge profile, and gaphite tone align with your current build or production setup.
Sold In: 1 Roll