PVC edgebanding MDF Solidz is a Rehau, Inc. edge banding designed to cover and finish exposed MDF or similar panel edges on woodworking and cabinet projects. The material is PVC, so it creates a consistent, uniform edge surface that visually matches MDF Solidz-style layouts. The 15/16 inch width spans typical 3/4 inch MDF edges with margin, which helps installers trim back to a crisp, straight line without exposing the core. The .018 inch thickness provides a thin, low-profile face that blends into surrounding surfaces while still defining the edge. Supplied as a 600 ft length, the roll format supports longer production runs and minimizes changeovers across multiple panels. Identified by manufacturer part number 301674-664, this specific MDF Solidz version allows shops to repeat the same edge detail across jobs that call for this look.
The 15/16 inch width on this Rehau PVC edge banding extends beyond typical 3/4 inch MDF thickness, giving trimming tools enough overhang to flush the edge cleanly after bonding. The .018 inch thickness keeps the edge layer thin, so routing or scraping operations remove minimal material while still leaving a defined, finished edge. With 600 ft on a single roll, shops can set up an edgebanding station and run many cabinet sides, shelves, or partitions in sequence, helping maintain consistent feed and trim settings from the first part to the last.
This edge banding is categorized as Edgebanding & Surfacing and specifically as PVC edge banding, positioning it for use on MDF or similar engineered panels in cabinetry and woodworking. The 15/16 inch width is sized to cover standard casework edges based on 3/4 inch MDF, so it works well on cabinet sides, bottoms, fixed shelves, and partitions where the edge will be seen. The MDF Solidz description ties this product to MDF-based layouts, so it suits projects where MDF core panels are specified and a coordinated edge treatment is required. With a total length of 600 ft, a single roll can serve both small one-off builds and larger runs that repeat the same edge detail across many panels in a job.
The .018 inch thickness of this PVC edge banding shapes how the finished edge feels and how it trims; it is thin enough that routed or scraped edges sit close to the panel face, supporting a smooth transition that does not stand proud. The 15/16 inch width gives consistent overhang along the full length of the panel, which helps edge-banding equipment or handheld trimmers follow a steady line, reducing the need for rework. Because the roll provides 600 ft of continuous material, the same feed, heat, and trimming settings can be maintained over many parts, promoting uniform edges from the first cabinet component to the last. Using the specific Rehau manufacturer part number 301674-664 also helps shops repeat this exact MDF Solidz edge on future projects that call for the same appearance.
This MDF Solidz edge banding is PVC, which provides a manufactured, uniform surface along MDF panel edges for a consistent finished appearance.
The Rehau PVC edgebanding MDF Solidz strip is 15/16 inch wide, giving coverage beyond 3/4 inch MDF edges so installers can trim back to a clean line.
The .018 inch thickness means the edge banding is thin, so routing or scraping removes little material and leaves a subtle, low-profile finished edge.
The 600 ft roll length supports many linear feet of MDF edges on cabinets or shelves, allowing long production runs without changing rolls.
Manufacturer part number 301674-664 identifies this specific Rehau PVC MDF Solidz edge banding, helping shops reorder the same material for repeat work.
This edge banding suits MDF cabinet components and similar panels where a 15/16 inch wide, .018 inch thick PVC edge is specified for a consistent look.
This Rehau PVC edgebanding MDF Solidz, sized at 15/16 inch wide and .018 inch thick in a 600 ft roll, supports MDF-focused cabinetry and panel projects where consistent, repeatable edge treatment is required across many parts.
Sold In: 1 Roll