PVC edgebanding soapstone 15/16 x .018 600 ft defines this Rehau, Inc. edge banding as a PVC strip sized for covering exposed edges on boards matched to a soapstone-style surface. The 15/16 inch width gives coverage across common 3/4 inch panel thicknesses plus overhang for trimming, which helps installers flush-trim cleanly without leaving substrate visible. The .018 inch thickness provides a low-profile edge, so the transition between face material and banded edge stays subtle on finished work. The 600 foot length provides a continuous run suitable for larger cabinet, furniture, or casework jobs, which allows longer stretches of uninterrupted edging before changing rolls. As a PVC edge banding from Rehau, Inc. in the soapstone look, this product ties panel faces and edges together visually on projects using matching surfaces from the same design family.
The 15/16 inch width of this PVC edge banding is sized to cover the face of a standard 3/4 inch board with extra material along both sides, which supports accurate application before trimming. That added width gives installers a margin that helps when positioning the banding on slightly irregular or out-of-square edges. The .018 inch thickness controls how much the band stands proud of the core, keeping the edge modest so it blends into the cabinet or furniture piece. Because the strip is supplied in a 600 foot length, it supports setting up for repeated cuts and feeds on an edgebander or hand application workflow without running short on longer cabinet runs.
This PVC edge banding, classified by Wurth Baer Supply as Edgebanding & Surfacing in the PVC category, is suited to covering raw edges on panels, doors, and shelves in woodworking and cabinet applications. The 15/16 inch width pairs with typical engineered wood or solid-core panels used in shops, giving coverage across the full thickness plus trimming allowance. Its soapstone designation links it to projects built around soapstone-style surfacing, so fabricators can extend the same look across exposed verticals, horizontals, and casework edges. Because the product is an edge banding strip rather than a sheet good, it is aimed directly at edge finishing rather than broad surface coverage, which focuses its use on closing off and protecting edges on finished assemblies.
The .018 inch thickness on this Rehau, Inc. PVC edge banding shapes how the material behaves in trimming and finishing, because a thinner profile reduces the amount of material removed when flush trimming, which can shorten touch-up steps. The 600 foot roll length influences setup efficiency on edge banding machines or bench operations, since fewer roll changes mean more continuous runs across cabinet components or shelving pieces. The 15/16 inch width also aids repeatable results, as the consistent oversize relative to 3/4 inch cores lets installers set up trimming tools to a known target instead of adjusting width for each panel. Together, the soapstone appearance, defined width, .018 inch thickness, and 600 foot length give shops a predictable PVC edge banding option that aligns with soapstone-style projects and supports steady production on small and larger runs.
This PVC edge banding is 15/16 inch wide and .018 inch thick, so it covers standard 3/4 inch panels with extra width for trimming and keeps the edge profile slim on finished parts.
This Rehau, Inc. PVC edge banding roll is 600 feet long, which supports edging multiple cabinets or larger casework runs before changing to another roll.
The product is classified as PVC edge banding, so the strip is made from PVC, giving a plastic-based edge treatment suited to cabinet and furniture panel edges.
The .018 inch thickness keeps the banding relatively thin, so less material stands proud of the core, helping trimming tools create a smooth, low-step transition at the edge.
The 15/16 inch width spans the 3/4 inch panel and leaves a small overhang, allowing installers to align the strip comfortably and trim both sides back to a flush edge.
The soapstone description identifies the visual style of this PVC edge banding, helping match the banded edge to soapstone-style surfacing used elsewhere in the project.
This Rehau, Inc. PVC edge banding in soapstone, sized at 15/16 inch wide, .018 inch thick, and 600 feet long, gives shops a defined option for edging soapstone-themed panels. For cabinet, furniture, or casework builds using soapstone-style surfaces, this roll from Wurth Baer Supply aligns the edge treatment with the face material design while supporting efficient runs across multiple components.
Sold In: 1 Roll