Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC Karuna Ash edgebanding is a 1mm thick edge banding from Rehau, Inc. that covers and protects raw panel edges, so finished work presents a uniform look along doors, shelves, and casework runs. The 15/16 inch width gives coverage suited to many common panel thicknesses while allowing trim back to a crisp line, helping installers deliver a consistent reveal on straight runs. The 600 foot length supports longer jobs or multiple smaller projects without constant material changes, which supports steady workflow on shop equipment. As a PVC edgebanding in the Karuna Ash design, it is intended to coordinate with surfaces using that pattern, helping fabricators maintain visual continuity from large panels down to narrow edges. Used as edge banding in woodworking and cabinet projects, it provides a defined transition between face material and edge treatment.
This PVC edge banding from Rehau, Inc. combines a 1mm thickness with a 15/16 inch width to support common edgebander setups and trimming passes. The 1mm profile gives enough material for machining and flush trimming without feeling oversized on standard casework. The 15/16 inch width leaves margin on each side of typical panel edges, so the banding can be positioned and then trimmed back to the substrate for a straight, even line. With 600 feet on a roll, shops can set up once on a run of matching Karuna Ash parts and process multiple components under the same feed speed and cutter settings.
This Karuna Ash PVC edge banding is suited to woodworking and cabinet projects where panels or components use the same Karuna Ash decor, so the edge can visually follow the face pattern. As edge banding in the Edgebanding & Surfacing class, it is intended for covering exposed edges of boards used in furniture, casework, or interior fittings. The 15/16 inch width gives flexibility across a range of panel sizes typically found in shop-built pieces, allowing fabricators to run edges on cabinet sides, shelves, and fronts under consistent settings. With 600 feet available, it supports both single large installations and repeat production of matching units that call for the same finish along all visible edges.
The 1mm thickness on this Rehau PVC edgebanding gives a defined profile for trimming, so cutters have enough material to shave flush without leaving a fragile edge, supporting clean results over long runs. The 15/16 inch width allows slight overhang on both sides of many standard panels, which helps operators position the banding confidently before trimming for a straight reveal. Classified specifically as edge banding within Edgebanding & Surfacing, it is designed to serve as the transition from panel face to edge, helping installers deliver a uniform finish along door and cabinet perimeters. The 600 foot roll length reduces mid-job material changes, so edgebanders can stay tuned to one material and decor, supporting repeatable quality from the first piece through the last.
This edgebanding is 1mm thick and 15/16 inch wide, which gives enough overhang for trimming while matching many common panel thicknesses in cabinet and furniture work.
The 1mm thickness provides a substantial PVC edge that can be machined and trimmed flush, helping create a solid, clean transition between the panel face and the finished edge.
The roll length is 600 feet, which supports extended production runs or multiple projects using the same Karuna Ash decor without frequent material changes.
This product is PVC edge banding in the Karuna Ash design, so it covers exposed board edges while visually coordinating with Karuna Ash panels in cabinetry or furniture.
This edge banding is manufactured by Rehau, Inc., and is listed under manufacturer part number 301799-106 for identification in project specifications.
The product is classified as edge banding in the Edgebanding & Surfacing category, indicating its role in finishing and protecting exposed panel edges in woodworking projects.
This Rehau PVC Karuna Ash edgebanding combines a 1mm thickness, 15/16 inch width, and 600 foot length to support efficient edge finishing on matching panels. For projects built around the Karuna Ash decor, this edge banding lets you carry that look cleanly across visible edges while maintaining consistent machine setups from part to part.
Sold In: 1 Roll