Edgebanding PVC Featherstone 3mm 1-5/16 x 300 FT identifies this as a dedicated edge banding product that finishes exposed panel edges, so cabinet and furniture projects gain a consistent, finished perimeter. The 3mm thick PVC construction creates a substantial edge profile that helps cover raw board edges and minor machining marks, giving a more solid, finished look along high-visibility runs. The 1-5/16 inch width is sized to cover common panel thicknesses with a bit of overhang, which supports trimming and flush-routing workflows on typical casework, shelves, or doors. The 300 FT roll length supports longer production runs and repeat jobs from the same material, which helps keep color and finish uniform across multiple cabinets or rooms. As a Featherstone color from Rehau, Inc., this edgebanding aligns with projects using that specific design, helping installers tie edges into matching faces. The PVC material classifies it within the Edgebanding & Surfacing category, fitting into standard woodworking shop setups.
The 3mm thick construction establishes how this edgebanding behaves during installation, providing enough depth to route or trim flush without feeling overly fragile, which is useful when working along longer cabinet edges. The 1-5/16 inch width gives clearance beyond standard panel thicknesses, allowing installers to apply, roll down, and then trim off excess for crisp alignment. Being a PVC edgebanding product within the Edgebanding & Surfacing category positions it for use with common edge banding equipment or hand-edge methods that bond a flexible strip to machined board edges. The 300 FT roll format means the material feeds well into continuous operations, supporting repeatable passes on case sides, tops, and shelves.
The Edgebanding, PVC, Featherstone 3mm Thick, 1-5/16 inch Width x 300 FT format targets cabinet, furniture, and other panel-based projects that require a finished edge around engineered wood cores. The 3mm thickness works well where a slightly more pronounced edge profile is desired, such as on kitchen, bath, or office casework. The 1-5/16 inch width fits applications using panels near that dimension when you want enough overhang for trimming, supporting clean edges along vertical cabinet sides or tall wardrobe panels. The 300 FT roll length supports small shops handling multiple jobs as well as installers finishing an entire room or run of cabinets with one continuous material. As a Featherstone design from Rehau, Inc., this edge banding suits projects built around that specific look so doors, drawer fronts, and cabinet ends share a coordinated appearance.
The 3mm thick PVC structure provides a forgiving amount of material for routing or trimming after bonding, allowing installers to fine-tune flushness and corner transitions without cutting through the band. The 1-5/16 inch width gives measurable working margin on typical panel sizes, which improves tolerance for slight saw variation or panel swelling while still achieving a straight finished line. The 300 FT continuous roll limits seam points where separate strips meet, which helps reduce visible joints along long cabinet stretches or full-height panels. The product classification as Edgebanding & Surfacing and Edge Banding clarifies its intended role in the assembly, making it a direct match for operations that dress raw board edges so they visually read as finished surfaces. The manufacturer part number 302114-090 provides a precise identifier that helps installers and shops reorder the same Featherstone PVC band when matching future work or extending an existing installation.
This edgebanding is 3mm thick, 1-5/16 inch wide, and supplied in a 300 FT length, giving installers a substantial profile, trimming overhang, and enough material for longer runs.
The 3mm thickness creates a more substantial edge profile that helps cover raw panel cores and provides enough material for clean routing or trimming along visible cabinet edges.
The 1-5/16 inch width offers coverage beyond typical panel thickness, allowing some overhang for routing or trimming back to a flush, accurate edge on casework surfaces.
The 300 FT roll length supports extended cabinet or furniture runs, helping maintain consistent Featherstone appearance across multiple panels with fewer material changeovers.
This item is an Edgebanding, PVC, Featherstone 3mm Thick, 1-5/16 inch Width x 300 FT product, classified under Edgebanding & Surfacing and Edge Banding for woodworking use.
The manufacturer part number 302114-090 uniquely identifies this Featherstone PVC edgebanding, helping shops specify, store, and reorder the exact same material for recurring jobs.
This Edgebanding, PVC, Featherstone 3mm Thick, 1-5/16 inch Width x 300 FT from Rehau, Inc. combines defined dimensions with a named Featherstone design, making it a targeted choice when edges must visually align with Featherstone surfaces. The 3mm thickness, 1-5/16 inch width, and 300 FT length support practical trimming room and longer runs on cabinet or furniture projects. For work where a specific Featherstone look and repeatable edge finish matter, this PVC edge banding from Wurth Baer Supply offers a clearly specified option ready to slot into panel-processing workflows.
Sold In: 1 Roll