PVC edgebanding light beige from Rehau, Inc. covers and protects raw panel edges with a consistent light beige finish, so cabinet or furniture runs line up in color. The strip is made from PVC material, providing a uniform synthetic edge that suits typical woodworking and cabinet applications where a matching light beige tone is needed. Its 3mm thick profile adds a defined, substantial edge, which helps visually finish thicker doors, drawer fronts, and work surfaces. The 1-5/16 inch width is sized to cover standard panel thicknesses with a bit of overhang for trimming, supporting a neat final edge after routine shop processing. A 300 foot roll length supports longer production runs or multiple small jobs from one coil, reducing changeovers during cutting and banding. As a PVC edge banding in light beige, it supports projects that call for coordinated edges across multiple parts.
This PVC edgebanding uses a 3mm thickness, giving installers material to work with during trimming and profiling so the finished edge remains solid after machining. The 1-5/16 inch width spans the edge of standard sheet goods with extra overhang on both faces, allowing typical trimmers or routers to bring the edge flush with the panel surface. A continuous 300 foot roll format feeds through edge-banding equipment or manual setups for repeated parts, keeping length available for straight runs on case sides, tops, or fronts. Because the banding is light beige PVC, it visually matches light beige designs while presenting a uniform synthetic surface along the edge once applied and trimmed.
This edge banding is categorized as PVC edge banding, positioning it for use on cabinet, furniture, or similar wood-based panels where a PVC edge is preferred. The light beige color supports projects built around light beige decorative faces, allowing door and case edges to track with the same color family. With a 1-5/16 inch width, the strip covers the edge of typical panel stock used in cabinetry, with enough width for trimming after bonding. The 3mm thickness suits applications where a thicker, more defined edge detail is desired compared to very thin edging, helping door fronts and exposed cabinet ends present a solid, finished edge line. As part of the Edgebanding & Surfacing category, it integrates into broader surfacing workflows for casework and fixtures.
The Rehau, Inc. branding and 302114-101 manufacturer part number clearly identify this specific light beige, 3mm thick, 1-5/16 inch wide PVC edgebanding, which helps shops tie drawings, cut lists, and purchasing to a repeatable material choice. The 300 foot roll length allows multiple cabinets, runs of shelving, or a mix of small components to be edged from a single roll, simplifying planning around footage per job. Using a single light beige color across all exposed edges reduces variation between pieces, helping finished installations look consistent when doors, drawer fronts, and cases are viewed together. The 3mm thickness gives extra material at the edge, so after trimming and light profiling, the edge still reads as substantial rather than thin. Together, these details support predictable, repeatable edging results on production or serious DIY projects that specify PVC edge banding.
This PVC edge banding is 3mm thick, 1-5/16 inch wide, and supplied in a 300 foot length, so it covers typical panel edges with extra width for trimming across many parts.
The 3mm thickness provides a more substantial PVC edge, so after trimming and light profiling, doors and panels present a defined, durable-looking edge line.
The light beige color keeps the edge tone consistent with light beige panel designs, so cabinet runs, doors, and exposed ends maintain a coordinated appearance.
This Rehau 302114-101 PVC edgebanding is suited to cabinet, furniture, and similar woodworking projects needing a light beige PVC edge on panel components.
The 1-5/16 inch width spans the edge of standard sheet goods with extra overlap, giving room for flush trimming along both faces of the panel.
The 300 foot roll provides long, continuous PVC edging, which supports multiple cabinets or parts in one run and reduces roll changes during production.
This Rehau, Inc. PVC edge banding in light beige combines a 3mm thickness, 1-5/16 inch width, and 300 foot length to support cabinet and furniture edging where a matching light beige edge is required. The defined 3mm profile suits visible doors, drawer fronts, and case ends, while the extra width allows straightforward trimming to a clean line. With the 302114-101 part number and clear size and color details, this roll aligns well with planned panel dimensions and finish choices when selecting edgebanding for upcoming shop or project work.
Sold In: 1 Roll