Edgebanding PVC Wallaby 3mm describes a PVC edge banding from Rehau, Inc. that is 3mm thick, so it provides a substantial edge layer that helps cover raw board edges in cabinet and furniture work. The 1-5/16 inch width allows this edge banding to span typical panel thicknesses with enough material for trimming to a flush finish on both faces. The 300 FT length is supplied as a continuous run, which supports longer projects or multiple cabinet jobs from a single roll. The PVC material establishes a uniform surface along the edge, giving a consistent appearance wherever it is applied. As an edge banding in the Edgebanding & Surfacing category, it is intended to finish exposed edges so substrates are not left bare in use.
This edge banding is 1-5/16 inch wide, so installers can align it to the panel and still have extra material to trim on both sides for a clean, flush result. The 3mm thickness means edgebanders and trimmers work against a solid edge profile rather than a thin tape, which helps maintain a straight line along doors, drawer fronts, and panels. The 300 FT roll length supports setups on edgebanding equipment where continuous feed reduces interruption, helping edges across a run stay visually consistent. As a PVC edge banding, it is suited to processes and tooling designed around PVC materials.
This edge banding from Rehau, Inc. is specified as PVC, Wallaby, 3mm thick, which positions it for use wherever a 3mm edge profile is part of the design. On cabinet sides, shelves, and doors, the 3mm thickness creates a defined edge that stands up as a visible detail rather than a thin film. The 1-5/16 inch width lets fabricators run it along panel edges and then trim back to the substrate on both faces, which is useful when panels vary slightly or when minor alignment shifts occur during edgebanding. Because the product is designated as Wallaby in both the SAP and web description, shops can assign that same name in cut lists and work orders so the intended color or pattern is consistently referenced across parts. The 300 FT length in a single roll supports shops that process multiple panels in sequence, keeping the same batch of material running through the edgebander from start to finish.
The 3mm thickness listed in the product name provides a clear target for tooling setup, so trimmers, scrapers, and profile cutters can be adjusted around that specific edge height. The 1-5/16 inch width gives a known starting dimension, helping operators set guides and pressure units so the banding tracks correctly on the edge before trimming. The 300 FT length specified in the description defines how much edge a shop can expect to run from one roll, which aids planning for larger cabinet or furniture batches. The manufacturer part number 302114-509 ties directly to this Wallaby PVC edge banding, so procurement and production can call out the same identifier when reordering or matching previous work. As part of the Edgebanding & Surfacing category and Edge Banding product class, it fits into workflows built around finishing raw panel edges with PVC materials.
This edge banding is 3mm thick, 1-5/16 inch wide, and 300 FT long, so it provides a substantial, trimmable edge profile over a long continuous run.
The 302114-509 edge banding is PVC, giving a consistent synthetic edge surface that aligns with other PVC surfacing materials in woodworking projects.
The 3mm thickness provides a solid edge that edgebanders and trimmers can reference, which supports a clean, defined profile along doors and panels.
The 1-5/16 inch width allows coverage across typical panel thicknesses and still leaves material for trimming both faces flush after bonding.
The 300 FT length offers extended continuous feed through edgebanding equipment, helping maintain consistent appearance across multiple parts in a run.
The Wallaby designation in the product name identifies this specific PVC edgebanding variant, so projects can repeatedly call out the same appearance and part.
This Rehau, Inc. PVC edge banding in Wallaby, 3mm thickness, 1-5/16 inch width, and 300 FT length offers defined dimensions that align with cabinet and furniture edge workflows. For projects calling out this Wallaby specification, choosing this 302114-509 edge banding keeps ordering, identification, and installation tied to the same clearly documented product.
Sold In: 1 Roll