Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding Weathered Char gives installers a dedicated edge treatment designed to cover exposed substrate and create a consistent finished look along cabinet and panel edges. The PVC construction provides a uniform surface that helps hide core material and supports a cleaner visual line on casework. With a .018 inch thickness, this edging offers a slim profile that keeps edge build-up minimal, which matters when aligning doors, drawer fronts, and panels in tight reveals. The 15/16 inch width is sized to cover common 3/4 inch panels with overhang for trimming, helping installers achieve a flush edge after machining. Supplied in a 600 FT length, this roll format supports longer runs and multiple cabinets from a single product, which can streamline layout and reduce material changeover during production.
This PVC edgebanding from Rehau, Inc. is specified at 15/16 inch width, giving extra coverage past 3/4 inch sheet goods so installers can apply, then trim both sides for a square, flush finish. The .018 inch thickness keeps the edge relatively thin, which helps panels slide into tight installations without adding bulk at the edge. With 600 FT on a single roll, shops can set up once and run many parts using the same edging, reducing downtime between cabinets or room sections. The defined Weathered Char color supports using one edging across an entire project where the same tone is desired on all exposed edges.
This Rehau, Inc. PVC edgebanding is identified as edge banding within the Edgebanding & Surfacing category, aligning it with cabinet and casework edge finishing tasks. The 15/16 inch width is suited to projects using panels around 3/4 inch thick, providing enough overhang to trim back for a clean edge. The .018 inch thickness supports applications where a thin edge profile is preferred, such as cabinet interiors or doors where hardware clearances and reveal lines rely on controlled edge build. The Weathered Char designation defines the color tone so it can be selected intentionally when a weathered, darker appearance is needed on exposed panel edges throughout a room or furnishing group.
The specified 15/16 inch width gives installers a repeatable amount of excess material to work with on both faces of the board, which supports consistent trimming and reduces the risk of short coverage on any edge. The .018 inch thickness limits the step between the face material and the edge treatment, which matters when doors meet face frames or when panels align side by side. The defined 600 FT roll length allows larger production runs to draw from a single coil, supporting consistent color and thickness across all edges in the same build. The Rehau, Inc. branding and manufacturer part number 302164-238 clearly identify this exact Weathered Char PVC edging, which helps shops reorder the same product for future work to match existing installations.
This PVC edgebanding is 15/16 inch wide, providing coverage past typical 3/4 inch panels so the edge can be trimmed back to a flush, straight finish on both faces.
The Weathered Char PVC edging is .018 inch thick, giving a thin edge profile that helps maintain cabinet clearances and tight reveal lines where doors and panels meet.
This Rehau PVC edge banding roll is 600 FT long, supporting multiple cabinets or larger projects from one continuous length for consistent color and thickness.
This Rehau PVC edge banding is specified as Weathered Char, providing a defined color tone that can be matched across panels in the same project.
This edge banding is made from PVC, identifying it as a thermoplastic edging suitable for typical shop handling of PVC edgebanding on cabinet and casework projects.
The manufacturer part number is 302164-238, which directly identifies this 15/16 inch by .018 inch Weathered Char PVC edgebanding for accurate selection and reordering.
This Rehau, Inc. PVC edgebanding in Weathered Char, sized at 15/16 inch wide by .018 inch thick in a 600 FT roll, provides a defined option for finishing exposed edges on panels. The combination of width, thin profile, and continuous length supports consistent edge treatment across cabinets and casework. For projects calling for a Weathered Char tone and slim PVC edge profile, this 302164-238 edging offers a clearly specified match for shop and jobsite work.
Sold In: 1 Roll