PVC raw birchply edgebanding gives you a dedicated edge treatment for panels where a birchply look is required. This Rehau, Inc. edge banding uses PVC material, so the edge stays consistent along the full length of your run. The .018 inch thickness is suited to projects where a slim edge is preferred, helping panels maintain a clean profile after trimming and flushing. The 15/16 inch width works with common panel thicknesses, giving enough coverage to trim both faces without exposing the core. The 600 FT length per roll supports longer cabinet or casework runs, so edges stay visually continuous from panel to panel. As a PVC raw birchply band, it is identified for jobs that call for a birchply appearance, which helps standardize material choices across a shop.
The .018 inch thickness on this PVC raw birchply edgebanding works with edge banding equipment set up for thin edges, so cutting and trimming tools can stay in a familiar range. The 15/16 inch width gives an installer or operator extra material beyond the panel faces, allowing trimming passes to produce a clean edge without chasing a narrow band. The 600 FT length limits roll changes during production runs, keeping machines running on the same material for more parts and supporting steady throughput. As an edge banding classified under Edgebanding & Surfacing, it fits cabinet and woodworking workflows that rely on dedicated banding stock for clean, finished panel edges.
This PVC raw birchply edgebanding is part of the Edgebanding, PVC product class, so it is intended specifically to finish exposed panel edges. The 15/16 inch width gives coverage for typical casework and cabinet components, which helps when edging sides, shelves, or vertical partitions that share the same birchply look. Because the band is .018 inch thick, it suits applications where a lighter edge is preferred, such as interior casework or furniture parts that benefit from a subtle transition between face and edge. The 600 FT roll length supports batch work on edgebanding machines, allowing a run of multiple cabinets or case parts to be processed with the same material for consistent appearance. As a Rehau, Inc. product with a defined raw birchply description, it aligns with projects that call out this specific edge banding in drawings or material lists.
The combination of .018 inch thickness and PVC material supports predictable trimming, which matters when many identical edges need to match across a job. The 15/16 inch width gives consistent overhang on both sides of standard panels, so setup for trimming and flush cutting can stay the same from part to part without chasing varying coverage. The 600 FT length on a single roll allows operators to run longer sequences of work without changing material, which helps avoid slight variations between rolls during a project. The manufacturer part number 302164-300 clearly identifies this exact configuration, so reordering for future phases of work keeps thickness, width, and color intent aligned with earlier installations.
This PVC raw birchply edgebanding is .018 inch thick, 15/16 inch wide, and supplied in a 600 FT length, giving a slim edge profile with ample trimming room for panel work.
The .018 inch thickness provides a thin edge band that suits installations where a light, unobtrusive edge is preferred, helping panels keep a clean overall profile after trimming.
The 15/16 inch width offers slight overhang on common panel thicknesses, which allows trimming on both faces while keeping the core covered during cabinet or casework fabrication.
The 600 FT roll length lets edgebanders run longer sequences of parts with the same material, reducing roll changes and supporting consistent edges throughout larger projects.
The raw birchply description identifies the intended birchply appearance of the PVC banding, aligning it with panels and components that are specified to match that look.
This Rehau, Inc. PVC raw birchply edgebanding is identified by manufacturer part number 302164-300, tying future orders to the same thickness, width, and roll length.
PVC raw birchply edgebanding from Rehau, Inc. delivers a defined combination of .018 inch thickness, 15/16 inch width, and 600 FT length for panel edge work. When a project calls for a birchply look with thin PVC edge treatment, this specific banding provides a repeatable option identified by part number 302164-300. Choosing this edge banding for cabinets or casework that share the same material standardizes panel edges and keeps future reorders aligned to the same dimensions and appearance intent.
Sold In: 1 Roll