Edgebanding PVC Seasoned Planked Elm defines this Rehau, Inc. edge banding as a PVC product in a Seasoned Planked Elm design, so it finishes exposed panel edges to visually coordinate with Seasoned Planked Elm surfaces. The .018 inch thickness keeps the edge profile slim, which suits casework or panels where a low-build edge is preferred for a cleaner transition. The 15/16 inch width covers standard panel thicknesses with a bit of tolerance, which helps installers align the band and trim flush without exposing the core. The 600 FT length provides a continuous supply from a single roll, which supports longer production runs and reduces roll changes on repetitive cabinet, furniture, or fixture jobs.
The .018 inch thick PVC profile sets how much material sits proud of the substrate, which keeps flush trimming light and helps maintain the panel face line after edging. The 15/16 inch width is sized to span typical panel thicknesses with some margin, so fabricators can align slightly to one face and still have enough overhang left to trim on the opposite side. The 600 FT length on this roll supports projects with many edges to cover, helping shops run a single material specification for an entire set of cabinets, fixtures, or panels in Seasoned Planked Elm.
This PVC Seasoned Planked Elm edge banding serves as the finishing layer on exposed edges of panels, doors, or shelves wherever a Seasoned Planked Elm look is specified. The decorative description aligns the edge appearance with Seasoned Planked Elm surfaces, so installers can continue the same visual across vertical gables, horizontal shelves, and door edges. With a 15/16 inch width, it suits edges on many panel-based cabinet and furniture components, covering the core while leaving enough margin for clean trimming. The .018 inch thickness supports applications where a subtle, low-profile edge is desired, helping the edge visually recede and highlight the main Seasoned Planked Elm surface.
The .018 inch thickness of this Rehau, Inc. PVC edge banding reduces the amount of material that trimming tools remove, which can streamline edge processing and support consistent flush results across multiple parts. The 15/16 inch width gives fabricators working room when applying to panel edges, since the slight oversize allows fine positioning followed by trimming without risking exposed substrate. The 600 FT roll length affects job planning by providing enough material for multiple pieces of casework, which supports using a single lot of Seasoned Planked Elm edge banding for a coordinated installation. The combination of PVC material, Seasoned Planked Elm style, and these dimensions defines a specific edge banding choice for woodworking projects built around Seasoned Planked Elm designs.
This Seasoned Planked Elm product is PVC edgebanding, which provides a plastic edge treatment for covering raw panel edges in woodworking and cabinet projects.
The edge banding is .018 inch thick, which keeps the profile slim so trimming operations stay light and the finished edge remains close to the panel face surface.
The 15/16 inch width suits many panel edges, giving slight overhang so installers can align to the face, trim back, and keep the core fully covered.
This PVC edgebanding is supplied in a 600 FT length, which supports longer runs and multiple cabinets or panels using the same Seasoned Planked Elm design.
Part number 302164-377 identifies this specific Rehau Seasoned Planked Elm PVC edgebanding configuration, helping shops match it consistently in ordering and job documentation.
This PVC Seasoned Planked Elm edge banding carries the same named design, so exposed panel edges can visually coordinate with Seasoned Planked Elm surfaces throughout a project.
This Rehau, Inc. Edgebanding, PVC Seasoned Planked Elm .018 inch Thick, 15/16 inch Width x 600 FT gives shops a defined material for edges on Seasoned Planked Elm projects. Use this single specification when a PVC Seasoned Planked Elm edge is required across multiple cabinets, shelves, or panel components.
Sold In: 1 Roll