Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding PVC Nocturne 15/16 x .018 600 FT describes a PVC edgebanding from Rehau, Inc. that is .018 inch thick and 15/16 inch wide, so it covers typical panel edges while adding only a thin layer. The 600 foot length on a single roll supports long cabinet or furniture runs without frequent roll changes, which keeps shop work moving steadily. The PVC material defines this as a plastic edge solution, suited to routing and trimming setups commonly used in woodworking shops. The Nocturne identification provides a specific color tone reference, so matching edges to coordinating surfaces stays consistent across a project. As an edge banding product, it is intended to finish raw board edges, giving panels a uniform appearance around all sides. The Rehau, Inc. branding identifies a known manufacturer for PVC edge materials, which supports patterning installs across multiple jobs.
This PVC Nocturne .018 inch thick edgeband is sized at 15/16 inch width, so it works with edging equipment set up for slightly overhanging banding that will be trimmed flush. The thin .018 inch construction influences how blades and trimmers contact the edge, encouraging light passes for a clean cut profile. A 600 foot length supports continuous edging on multiple cabinets, allowing a shop to set up an edgebander and run a batch without frequent material changes. As a PVC edge banding, it integrates into workflows that routinely process plastic bands on cabinet, closet, or fixture components. The Nocturne identification ties this material to a consistent visible tone, which matters when every finished edge on doors, panels, and shelves needs the same appearance across a full installation.
This Rehau, Inc. PVC edgebanding in Nocturne is specified as 15/16 inch wide, so it is suited for edging panel materials where a slight overhang will be trimmed. In cabinet shops, that width supports use on door edges, finished shelves, side panels, and drawer fronts cut from sheet goods. The .018 inch thickness positions it as a thin band that follows substrate contours, so it is effective anywhere a low-profile edge is preferred. Because the roll length is 600 feet, it fits well into production runs of multiple cabinets or casework pieces, letting an operator edge many parts for the same project from one continuous supply. As part of an edgebanding and surfacing category, it plays the role of final edge finish on boards, turning raw edges into presentable borders that visually tie into the chosen Nocturne surface tone.
The .018 inch PVC thickness helps keep edge buildup minimal, so trimming and scraping steps can bring the band almost level with the face with controlled passes. That thin profile matters when the goal is a subtle transition between surface and edge on cabinets or fixtures. The 15/16 inch width provides working tolerance during application, so installers can position the band slightly proud on both sides and then trim back for accurate alignment. Over a 600 foot roll, this repeatable width and thickness help maintain the same setup on an edgebander from the first panel to the last. The Nocturne designation establishes a single appearance reference, allowing repeated use of the same material whenever that specific look is required on future projects. Using the Rehau, Inc. 302284-635 identification keeps purchasing and job documentation aligned to the exact PVC edgebanding that delivered the expected results.
The edgebanding is 15/16 inch wide and .018 inch thick, so it provides slight overhang for trimming while keeping the edge build minimal on cabinet and panel work.
The 600 foot length allows long production runs of doors, shelves, or panels from a single roll, which keeps edging operations moving with fewer material changeovers.
The Nocturne description identifies a specific appearance for the PVC band, helping match edges across panels that share the same visual tone in a project.
This edgebanding is made by Rehau, Inc., so installers can align it with other Rehau PVC edge solutions used across projects.
The 302284-635 part number uniquely identifies this Rehau Nocturne PVC edgebanding, which simplifies specifying and reordering the same material for repeat jobs.
The .018 inch PVC thickness keeps the band relatively thin, so trimming and scraping can bring the edge close to flush with controlled cutting passes.
This Rehau, Inc. PVC Nocturne .018 inch thick, 15/16 inch wide, 600 foot edgebanding roll brings defined dimensions and a specific appearance to cabinet and panel edging. The width allows overhang for trimming, while the thin profile supports a refined finished edge. The 600 foot length supports extended runs on larger jobs without frequent roll changes, helping maintain consistent settings on edge processing equipment. With the 302284-635 part number clearly identifying this Nocturne PVC band, it fits projects where repeatable edging results and a known visual tone are important. For work that relies on a matching PVC edge around doors, shelves, and casework panels, this edgebanding provides a clearly specified option.
Sold In: 1 Roll