Edgebanding, PVC Stoneridge 1mm Thick, 15/16" Width x 600 FT

Edgebanding PVC Stoneridge 1mm For Clean Panel Edges

Edgebanding PVC Stoneridge 1mm defines this product as a PVC edge band from Rehau, Inc. that finishes and protects exposed substrate edges on casework and furniture panels. The 1mm thick construction provides a substantial edge profile that covers core material while allowing clean trimming, which supports a professional look on residential or commercial projects. The 15/16 inch width is sized to cover common 3/4 inch panels with slight overhang, giving room for flush trimming without exposing the core. Supplied in a 600 FT length, the roll format supports longer production runs and repeat jobs without frequent changeover, which helps maintain consistent color and profile across a set of cabinets or fixtures. The Stoneridge identification links this edgebanding to a specific decor, aiding accurate material selection when matching panel surfaces.

Key PVC Stoneridge Edge Banding Work Advantages

• The 1mm thick PVC construction creates a sturdy edge profile that trims cleanly, helping panels resist day-to-day contact along cabinet fronts and shelving edges during normal service.
• The 15/16 inch width is designed to cover standard panel thicknesses with margin for machining, so installers can trim back to a flush, chip-free edge without exposing the core.
• The 600 FT roll length supports batch work and long runs, reducing roll changes so color, gloss, and edge appearance stay consistent across multiple cabinets or casework sections.
• The Stoneridge identification ties this edgebanding to a defined decor, simplifying material matching when coordinating edges with Stoneridge-faced panels in the same project.
• The Rehau, Inc. branding connects the edgebanding to an established edge banding manufacturer, which supports predictable performance when used alongside other Rehau surfacing materials.

Edgebanding PVC Stoneridge 1mm Fit And Application Use

This edge band is classified as Edgebanding, PVC, which identifies it as a surfacing solution for covering exposed panel edges in woodworking projects. The 1mm thickness gives fabricators enough material to band straight runs and outside corners while maintaining a solid profile at the edge. With a 15/16 inch width, the strip is intended to slightly overhang typical panel faces before trimming, which aids precise alignment along both sides. The 600 FT length makes this roll suitable for shop environments that run multiple pieces from the same decor, helping each cabinet, door, or shelf share the same edge material. The Rehau Stoneridge designation helps shops tie this edge band to matching decor inventory when planning cut lists and layout.

Where This PVC Edge Banding Works Best

Stoneridge 1mm Banding On Panel And Cabinet Edges

This product is classified under Edgebanding & Surfacing and Edgebanding, PVC, so its role is to finish the exposed edges of boards used in cabinetry, furniture, and other panel-based builds. The 1mm thick profile offers a solid visual edge that suits casework, cabinet doors, and shelving where a defined, finished border is preferred over ultra-thin tape. Because the width is 15/16 inch, it covers standard panel thicknesses with room for trimming, supporting clean lines on vertical cabinet sides, horizontal shelves, and tall partitions. The 600 FT length supports repeated use of the same Stoneridge decor across a full room layout, helping installers carry the same edge detail from base cabinets to uppers and tall units.

Details That Support Consistent Stoneridge Edge Results

The combination of 1mm thickness and 15/16 inch width gives fabricators a forgiving band during machining, since the extra material allows for fine trimming passes while keeping the Stoneridge decor centered on the edge. Being PVC edgebanding, the material is suited to common shop edgebanding equipment designed for PVC, which helps maintain smooth, uniform edges along long runs. The 600 FT roll length reduces the number of roll changes on larger jobs, which supports consistent color and pattern from part to part when using the same Stoneridge specification. The specific manufacturer part number 315428-052 provides a precise reference for reordering, so replacement rolls match previous installations where the same Stoneridge edge appearance needs to continue.

Common Questions About Stoneridge PVC Edge Banding

Choose This Stoneridge Banding For Matching Edges

The Edgebanding, PVC Stoneridge 1mm Thick, 15/16 inch Width x 600 FT roll from Rehau, Inc. offers a defined thickness, practical width, and substantial length for edge finishing. When a project calls for the Stoneridge decor across multiple cabinets or panels, this specific 315428-052 PVC edge band provides the matching edge material needed to carry that look across doors, shelves, and casework runs.