Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC Dahat Teak edgebanding from Rehau, Inc. is a PVC edge banding designed to finish and protect raw panel edges in woodworking projects. The Dahat Teak tone provides a teak-style edge treatment that visually aligns edge details with Dahat Teak surfaces, supporting consistent color from face to edge on cabinets, casework, or fixtures built around that decor.
The 1mm thick PVC construction creates a substantial edge profile that covers exposed substrate while offering a defined visual line along doors, drawer fronts, and panels. This thickness helps transition between the face surface and the edge, giving projects a finished, professional look wherever cut edges would otherwise show.
The 15/16 inch width is sized to work with common panel thicknesses, giving enough coverage to span the face and back edge while allowing standard trimming practices. With a 600 foot length on a single product, this edgebanding supports longer production runs or multiple jobs in the same Dahat Teak color without frequent material changeouts.
This Rehau PVC Dahat Teak 1mm thick, 15/16 inch wide edgebanding is sized for standard edge banding workflows where the band is applied to exposed panel edges and then trimmed. The 1mm thickness works with typical edge banding cutters and trimmers, supporting clean finishing passes along cabinet parts. The 15/16 inch width provides margin over common panel thicknesses, giving room for flush trimming on both faces without exposing the core. With 600 feet available on one product, installers can set up their edgebanding stations once and run a substantial number of parts in Dahat Teak before changing material, supporting efficient shop flow on color-coordinated jobs.
This Rehau, Inc. edge banding is classified as Edgebanding & Surfacing in the Edgebanding, PVC product class, so it is intended for finishing panel edges in woodworking environments. The Dahat Teak color is suited to projects that use Dahat Teak-style decorative surfaces, allowing doors, end panels, and shelves to carry the same edge tone as the main faces. In cabinet shops and millwork operations, the 1mm thick profile is well suited to components that benefit from a defined edge line, such as cabinet fronts and commercial casework.
The 15/16 inch width supports work on panel edges where a small amount of overhang is needed for trimming, which fits common cabinet-grade board formats. Because this product provides 600 feet of continuous edgebanding, it supports batching Dahat Teak jobs so that all related parts receive the same edge treatment in a single run. That helps installers and fabricators maintain visual continuity across banks of cabinets, tall units, and matching furniture pieces built around the Dahat Teak decor.
The 1mm thickness of this PVC Dahat Teak edgebanding contributes to a uniform look after trimming, because the band supplies enough material to form a consistent edge profile along the full length of each panel. This helps reduce visible waviness along cabinet doors and long shelves, which can occur when thinner edge material is used on irregular substrates. The 15/16 inch width gives an installer working room during application and trimming, supporting accurate alignment to the panel face and tight seams at the corners.
The 600 foot length supports repeatable color and material performance across larger projects, since the same roll can be used for numerous cabinets and partitions. With the product clearly identified by the Manufacturer Part # 315431-133 and SAP description 15/16'X1MM DAHAT TEAK 600FT ABS, shops can specify and reorder the same Dahat Teak PVC band when matching existing work or extending an installation, keeping future additions visually consistent with the original job.
This edgebanding is 1mm thick and 15/16 inch wide, which provides enough coverage for common panel edges while allowing standard trimming on both faces after application.
The Rehau Dahat Teak edge banding length is 600 feet, supporting longer production runs and helping shops edge band multiple cabinets or components in one consistent color.
This Dahat Teak edge banding is PVC, so it is suited to standard PVC edgebanding application and trimming processes used on cabinet and casework panels.
PVC edgebanding Dahat Teak 1mm suits projects using Dahat Teak-style surfaces, where a coordinated edge color is needed on cabinet doors, shelves, and casework panels.
The 1mm thickness provides a substantial edge layer that trims cleanly and creates a defined profile, supporting consistent visual lines along doors and panel edges.
Manufacturer part 315431-133 identifies this specific Rehau PVC Dahat Teak 1mm thick, 15/16 inch wide, 600 foot edgebanding, simplifying specification and repeat ordering.
The Edgebanding, PVC Dahat Teak 1mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. provides a defined Dahat Teak edge solution for cabinet and casework projects. The combination of 1mm thickness, 15/16 inch width, and 600 foot length aligns with common shop workflows where consistent color, repeatable trimming, and extended runs are important. For projects built around Dahat Teak decor, selecting this edge banding lets the same tone carry across door, drawer, and panel edges so finished work presents as one coordinated system.
Sold In: 1 Roll