PVC Sunlit Pine edgebanding 1mm gives you a dedicated edge banding solution for panels where a Sunlit Pine look is required. This Rehau, Inc. PVC edge banding is classified as edge banding within edgebanding and surfacing, so it is intended specifically for finishing exposed panel edges in woodworking applications where a consistent edge material is needed. The 1mm thick construction provides a defined edge profile for panels, which supports an even transition from face to edge on casework or similar components. The 15/16 inch width is sized to cover common panel thicknesses while allowing trimming back to a clean line along both faces. The 600 foot length supplies continuous material for larger runs, helping keep edge appearance consistent from cabinet to cabinet or panel to panel. The Sunlit Pine coloration gives you an edge solution that visually aligns with Sunlit Pine-style surfaces.
This PVC Sunlit Pine edgebanding is specified at 1mm thick, which establishes a consistent layer for machining and finishing along panel edges. The 15/16 inch width gives you enough material to center the band on the edge and trim back to the faces, supporting straight, even edges on cabinets, furniture components, or commercial fixtures. With a 600 foot length, one roll serves extended production or multiple smaller builds, which supports repeatable color and edge characteristics across all pieces using this Sunlit Pine banding.
This Rehau, Inc. PVC Sunlit Pine edgebanding in the edge banding product class is suited for finishing exposed edges on panel-based constructions that call for a Sunlit Pine appearance. The 1mm thickness provides a defined edge that works well on cabinet sides, shelves, doors, and drawer fronts where a matching or coordinating edge is needed. The 15/16 inch width covers standard panel thicknesses used in many woodworking and casework projects, giving room for trimming while fully hiding the core along the faces. Because the web description and SAP description both specify Sunlit Pine and 1mm thickness, you gain a clearly identified option when selecting an edge band to pair with Sunlit Pine-style faces across residential or commercial installations.
The 1mm thickness of this PVC Sunlit Pine edgebanding supports consistent routing, scraping, or sanding to blend the edge with the panel face, which matters when panels are aligned side by side in cabinetry or fixtures. With a 15/16 inch width, the banding offers enough margin for precise placement along the panel edge, then trimming to a clean joint without exposing the underlying panel material. The 600 foot length helps maintain continuity of Sunlit Pine tone and surface from the first cabinet to the last on a project, because all edges are drawn from the same run. The clearly defined manufacturer part number 315431-272 and matching descriptions simplify repeat ordering when future work calls for the same Sunlit Pine 1mm PVC edge banding setup.
This product is PVC edgebanding from Rehau, Inc., so it provides a plastic edge solution suited to woodworking panels where a Sunlit Pine appearance is desired.
The Rehau PVC Sunlit Pine edgebanding is 1mm thick, which creates a defined edge layer that supports uniform trimming and a consistent profile along cabinet or fixture edges.
The 15/16 inch width spans typical panel thicknesses, allowing the band to overhang both faces for trimming back to a flush edge that conceals the panel core.
Each roll provides 600 feet of PVC Sunlit Pine edgebanding, supporting extended production runs or multiple projects with consistent color and edge characteristics.
Part number 315431-272 identifies this specific Rehau PVC Sunlit Pine edgebanding configuration, tying together the 1mm thickness, 15/16 inch width, and 600 foot length.
This product is classified under Edgebanding & Surfacing as edge banding, which helps align it with other panel finishing materials during project planning and ordering.
This Edgebanding, PVC Sunlit Pine 1mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. offers a clearly defined edge banding option for Sunlit Pine-style projects. When a job calls for 1mm thick PVC edge treatment in this color tone, the 315431-272 configuration provides known dimensions and length for consistent results. When planning cabinets, fixtures, or furniture that rely on panel construction, this Sunlit Pine PVC edgebanding lets you match edge appearance to your selected surfaces and maintain that look from the first panel to the last.
Sold In: 1 Roll