PVC roasted oak edgebanding from Rehau, Inc. is a PVC edge banding designed to finish exposed panel edges on cabinetry, furniture, and other casework built from sheet goods. The 1mm thick PVC construction provides a defined edge profile that stands up to typical shop handling during sizing and trimming. The roasted oak appearance helps carry a wood look across cut edges so the edge blends with matching surfaces on the job. The 15/16 inch width is sized for covering standard panel thicknesses while allowing trimming for a clean flush edge. The 600 ft length supplied on a single roll supports longer runs of cabinet or fixture production without frequent roll changes, which supports steady work at the edgebander. The product is classified as edge banding within the edgebanding and surfacing category, so it fits directly into typical woodworking workflows that rely on PVC edge trims for panel finishing.
The 15/16 inch width on this PVC roasted oak edgebanding works with panels that fall near that thickness, leaving slight overhang for trimming after application. That overhang lets installers run trimmers or routers to bring the edge perfectly flush with the board faces. The 1mm thickness behaves like typical PVC edgebanding in standard woodworking processes, so equipment set up for 1mm material can be dialed in for feed speed, trimming, and scraping without changing to a different material class. Because the product is supplied as a 600 ft roll, it feeds smoothly into automatic or manual edgebanders over long runs, helping maintain a predictable workflow when edging cabinet boxes, shelves, or furniture parts.
This Edgebanding, PVC Roasted Oak 1mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. serves as a finishing edge on casework built from sheet materials. Shops use the roasted oak appearance to extend a coordinated look from the surface across the cut edge of panels. When running multiple cabinet boxes or large furniture components, the 600 ft length supports edging many parts from a single roll, which helps keep color and grain appearance consistent across the run. The edge banding sits in the edgebanding and surfacing category, so it fits naturally into workflows that combine panel processing, edgebanding, and final assembly without changing material families midstream. Because it is classified as edge banding, it plays the role of a dedicated edge solution rather than a general trim, which supports repeatable set-ups on edgebanders focused on 1mm PVC stock.
The 1mm thick construction of this PVC roasted oak edgebanding provides a consistent material thickness for machine settings, which supports clean trimming and scraping passes without chasing variable edge profiles. Its 15/16 inch width gives a predictable amount of overhang on panels near that dimension, so operators can rely on a uniform trim cut around doors, drawer fronts, or cabinet sides. The 600 ft roll length also supports repeatability because a single roll can often carry an entire small to medium project, reducing variation that might appear when switching between different lots. The manufacturer part number 315431-273 identifies this exact roasted oak variant, which helps shops and repeat buyers specify the same edge banding again when matching existing work or extending a job. Listed in the PVC edgebanding product class, it aligns with equipment, adhesives, and processes tuned for PVC edge banding in professional woodworking environments.
The Edgebanding, PVC Roasted Oak 1mm Thick, 15/16 inch Width x 600 FT provides 1mm thickness, 15/16 inch width, and 600 feet length, supporting standard panel edges and extended production runs.
The 1mm thick PVC construction gives a defined edge that works well with common edgebander and trimmer settings, helping produce clean, consistent edges on cabinet and furniture parts.
This PVC roasted oak edgebanding is used to finish exposed panel edges on cabinetry, furniture, and other casework where a roasted oak wood-look edge is desired.
The 15/16 inch width covers panels near that thickness while allowing slight overhang, so installers can trim the edge banding flush with the panel faces after application.
The 600 ft length supports long runs on edgebanding equipment, reducing downtime and helping maintain color and edge appearance across multiple parts in a project.
The manufacturer part number 315431-273 identifies this specific Rehau PVC roasted oak edgebanding in 1mm thickness, 15/16 inch width, and 600 ft length for accurate reordering.
This Edgebanding, PVC Roasted Oak 1mm Thick, 15/16 inch Width x 600 FT provides a PVC edge banding solution tailored to roasted oak panel work. With its 1mm thickness, 15/16 inch width, and 600 ft roll length, it supports efficient edging on cabinetry, furniture, and casework built from sheet goods. The roasted oak appearance helps tie exposed edges to matching surfaces across a project. For shops standardizing on PVC edgebanding in this size range, the defined dimensions and Rehau, Inc. identification simplify stocking and repeat ordering when a consistent roasted oak edge is needed.
Sold In: 1 Roll