Rehau ABS Edgebanding 15/16" x 1 mm, Steel Oak, 600', 315431 274

Edgebanding PVC Steel Oak 1mm For Clean Edges

Edgebanding PVC Steel Oak 1mm gives you a dedicated edge banding solution in a Steel Oak design for finishing raw panel edges, so cabinet and furniture projects present a consistent look along every exposed edge. The PVC material defines this product as a plastic edge treatment rather than a veneer or solid wood strip, so it suits many laminated and composite panel applications where a durable synthetic edge is preferred. The 1mm thickness establishes a substantial edge layer, which supports machining, trimming, and light profiling while maintaining a solid visual line along doors, drawer fronts, and shelves. The 15/16 inch width is sized to cover common panel thicknesses with trim allowance, so you can band standard casework or fronts and then flush-trim back to the surface. The 600 FT length designates this as a continuous roll quantity suited to production runs or multiple projects from a single stock item.

Steel Oak PVC Edgebanding Details That Matter

• The Steel Oak description specifies the color and pattern character, so edges can visually align with Steel Oak-faced panels for a coordinated cabinet or furniture run.
• The PVC construction defines a synthetic edgebanding material, so it works where a non-porous, uniform edge material is preferred in woodworking and casework shops.
• The 1mm thickness provides a measurable edge layer, so trimming and light contouring can be performed while still maintaining a defined edge profile on finished parts.
• The 15/16 inch width gives coverage beyond typical panel thickness, so installers can position the banding with some overhang and then trim it flush to the faces.
• The 600 FT roll length supplies a continuous run of material, so multiple cabinet boxes, fronts, or shelves can be processed from the same Steel Oak edgebanding stock.

Steel Oak Edgebanding Fit And Working Characteristics

This Rehau, Inc. edgebanding is defined as PVC Steel Oak 1mm Thick, 15/16 inch Width x 600 FT, so it targets projects that require that specific thickness, width, and length. The 1mm thickness interacts with standard trimming and edge-banding equipment by presenting enough material for clean cutting and edge finishing, which supports consistent results across repeated parts. Because the width is 15/16 inch, it spans the face and back edges of typical panels with slight excess, which allows installers to focus on accurate alignment along one reference face and remove the rest. The 600 FT length means the same material can be used across many components within a job, which helps maintain color and texture continuity along doors, drawer fronts, and case edges.

Using Rehau Steel Oak Edgebanding In Woodwork

Where Steel Oak PVC Edgebanding Is Applied

This product is classified as Edgebanding & Surfacing, Edgebanding, PVC and as Edge Banding, so it is positioned for applications that require covering exposed panel edges in woodworking and related fabrication. The Steel Oak identification ties it to projects that use Steel Oak surfaces on panels, fronts, or shelves, enabling visual continuity between faces and edges. With a 15/16 inch width, the banding can be applied to edges of panels that fall within that coverage while leaving enough material for trimming, which suits many cabinet carcasses and fronts. The 600 FT roll length supports use in production-style environments or multi-piece jobs, because a single roll can serve a large number of edges before replacement.

Why The Dimensions Support Repeatable Edge Results

The stated 1mm thickness sets a standard for edge build, which allows shops to dial in trimmers and edge tools to that thickness and then repeat the same setup part after part. The 15/16 inch width provides predictable overhang on common panel thicknesses, so clamping or feeding equipment can be configured around that dimension and reused across similar jobs. Because the web description and product name both specify 600 FT, users can plan job sequencing and material yield around this continuous length, matching project edge-footage requirements to the roll. The identification as Rehau, Inc. Edgebanding, PVC Steel Oak 1mm Thick, 15/16 inch Width x 600 FT helps with reordering the exact same color, thickness, and width, so future repairs or additions can use the same edge profile and appearance.

Common Questions About Steel Oak PVC Edgebanding

Select This Steel Oak Banding For Matching Work

The web description defines this item as Edgebanding, PVC Steel Oak 1mm Thick, 15/16 inch Width x 600 FT, so it offers a clearly specified edge material for Steel Oak projects. When a job calls for a 1mm thick, PVC Steel Oak edge solution matching 15/16 inch width and 600 FT length, this Rehau, Inc. product from Wurth Baer Supply provides that exact combination for finishing exposed edges to the same Steel Oak look.