Edgebanding, PVC Bourbon Teak 1mm Thick, 15/16" Width x 600 FT

PVC Bourbon Teak Edgebanding For Clean Panel Edges

PVC Bourbon Teak edgebanding from Rehau, Inc. is a PVC edge banding designed to finish exposed edges on panels where a Bourbon Teak look is required. The 1mm thick construction gives the edge a solid, substantial profile that matches typical furniture-grade edge thickness. The 15/16 inch width covers standard panel edges with a small margin, supporting consistent trimming along cabinets, casework, or shelving runs. Supplied in a 600 FT length, this roll format supports longer production runs or multiple jobs without constant changeover, helping maintain workflow on site or in the shop. As part of the Edgebanding & Surfacing category, this PVC edge banding fits into standard woodworking processes wherever a durable Bourbon Teak appearance is specified. The stated manufacturer part number 315431-310 identifies this exact color, thickness, width, and length combination for repeat ordering.

Key Bourbon Teak Edgebanding Details That Matter

• The 1mm thick PVC construction creates a defined, furniture-style edge that aligns well with common cabinet and casework design, supporting a finished look after trimming and flushing.
• The 15/16 inch width gives coverage across typical panel thicknesses with slight overhang, allowing installers to trim back to a clean line without exposing the core material.
• The 600 FT roll length supports extended runs of Bourbon Teak panels, reducing changeovers during production and helping maintain consistent edge appearance across multiple pieces.
• The PVC Bourbon Teak designation ties the edge color and appearance to a specific Bourbon Teak tone, supporting a unified look wherever this edge banding is applied in a project.
• The Rehau, Inc. branding and manufacturer part number 315431-310 identify this specific PVC Bourbon Teak 1mm, 15/16 inch, 600 FT product for straightforward reordering on future jobs.

Installation Fit For 1mm PVC Bourbon Teak Edges

This PVC Bourbon Teak 1mm thick, 15/16 inch width edge banding is sized to work with common panel edge-banding equipment that handles 1mm PVC material. The 1mm thickness supports stable feeding through typical edgebanders, hand trimmers, or similar tools, helping maintain straight, predictable cuts. With its 15/16 inch width, the banding provides the small overhang preferred for trimming flush to cabinet sides, shelves, or casework edges after application. The 600 FT roll length suits production-style workflows, allowing long sequences of edges to be applied before changing rolls, which supports consistent results across an entire run of Bourbon Teak components.

Using Rehau PVC Edge Banding In Real Projects

Where This Bourbon Teak Edge Banding Performs Best

This Rehau, Inc. Edgebanding, PVC Bourbon Teak 1mm Thick, 15/16 inch Width x 600 FT product fits projects that call for a Bourbon Teak appearance on exposed panel edges in cabinets, furniture, or casework. Its classification as Edge Banding and listing under Edgebanding & Surfacing place it squarely in woodworking and shop environments where panel-based construction is standard. The 1mm thickness gives enough material to create a visually solid edge along vertical cabinet sides, horizontal shelves, or panel doors. Because the roll length is 600 FT, a single roll can serve multiple cabinets or a full room of Bourbon Teak-style panels, supporting uniform color and edge profile throughout the installation. The PVC material and Bourbon Teak designation support use wherever a matching Bourbon Teak edge is specified alongside related surfaces in a project.

Why Thickness, Width, And Roll Length Support Results

The 1mm thick construction of this PVC Bourbon Teak edge banding from Rehau, Inc. supports clean trimming because the material has enough body to cut without fraying when used with standard edge tools. The 15/16 inch width provides a practical amount of overhang across typical panel thicknesses, helping installers flush-trim to the face for a straight, consistent line. That width also supports alignment along various panel orientations, so vertical and horizontal edges maintain the same finished look. The 600 FT roll length benefits shops and installers handling Bourbon Teak jobs by extending the distance that can be edged before a roll change, which helps keep color and sheen consistent from piece to piece. The manufacturer part number 315431-310 connects these dimensions and the Bourbon Teak tone to a single, repeatable product choice for future work.

Common Questions About This PVC Bourbon Teak Edgebanding

Select This Bourbon Teak Roll For Matching Edges

The Edgebanding, PVC Bourbon Teak 1mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. offers a defined combination of thickness, width, color, and length for Bourbon Teak projects. By using the manufacturer part number 315431-310, installers and shops can repeatedly obtain the same 1mm PVC profile and 15/16 inch coverage wherever matching Bourbon Teak edges are needed. For panel-based cabinets, furniture, or casework that call for a consistent Bourbon Teak finish along exposed edges, this 600 FT roll format supports efficient runs with a unified appearance across multiple components.