Edgebanding PVC Heirloom Oak 1mm gives cabinet and woodworking projects a defined edge treatment by covering raw panel edges with a PVC strip in a Heirloom Oak design. The 1mm thick PVC construction creates a substantial edge layer that masks exposed core material, which helps produce a finished look along cabinet sides, shelves, and panels. The 15/16 inch width is suited to match common panel thicknesses, so the material can be trimmed flush after bonding without excessive waste at the edge. The 600 FT length supplies a continuous run of edgebanding that supports longer fabrication jobs or multiple cabinet runs from a single coil, reducing changeover during production. The Heirloom Oak appearance aligns the edge treatment with Heirloom Oak surfaces, providing visual continuity across faces and edges on matching projects where that pattern is used.
The 1mm thickness on this PVC Heirloom Oak edgebanding sets a consistent edge build, which supports predictable trimming and flushing operations with standard edge tools after adhesive bonding. The 15/16 inch width spans the edge of typical casework panels with slight overhang, which allows installers to remove the surplus and create a straight, aligned edge line along cabinet sides, doors, or shelves. The PVC material composition forms a uniform, machinable strip, which works with common edgebanding application and trimming equipment in woodworking shops. The 600 FT roll length reduces interruptions on longer jobs, which supports steady feed through manual or automated edgebanding setups when running multiple components in sequence.
This Edgebanding, PVC Heirloom Oak 1mm Thick, 15/16 inch Width x 600 FT product is suited to edging cabinet components and furniture panels where a Heirloom Oak look is required along exposed edges. The PVC material works as an edge treatment on panels in the woodworking industry, tying into the broader surfacing and edgebanding category used for casework and fixtures. The 15/16 inch width positions the strip to cover edges on many panel-based assemblies, from sides and ends to shelves, before trimming. In a shop setting, the 600 FT length on a single roll supports production runs where numerous parts share the same Heirloom Oak design, helping maintain consistency from the first piece to the last part in that run.
The 1mm thick construction of this Rehau, Inc. edge banding creates a repeatable profile at every treated edge, which helps maintain a uniform visual band around doors, drawer fronts, and cabinet bodies when the material is trimmed flush. The 15/16 inch width gives a controlled amount of overhang on common panels, which lets fabricators cut back to a clean, straight edge line without cutting into the panel face material. The 600 FT continuous length minimizes roll changes across sequences of parts, which reduces stop-and-start transitions that can disrupt edge alignment or color continuity between components. The defined Heirloom Oak appearance keeps the edge presentation tied to Heirloom Oak faces, which supports a consistent finished look across entire installations designed around that pattern.
This product is PVC edgebanding, which provides a uniform synthetic edge layer that can be processed with standard woodworking edgebanding and trimming equipment.
The edge banding is 15/16 inch wide, giving coverage across typical panel edges with extra width available for trimming to a flush finished edge.
The strip is 1mm thick, creating a defined edge build that supports consistent trimming, shaping, and profiling along cabinet and furniture components.
The roll length is 600 FT, which supports edging multiple panels or full cabinet runs in the same Heirloom Oak design from one continuous coil.
Rehau, Inc. is listed as the brand, indicating this edgebanding originates from that manufacturer for shops standardizing on Rehau PVC products.
The number 315431-312 is the manufacturer part number, identifying this specific 1mm thick, 15/16 inch wide, 600 FT PVC Heirloom Oak edgebanding.
This Edgebanding, PVC Heirloom Oak 1mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. combines a defined 1mm profile, 15/16 inch coverage, and a 600 FT length to support continuous edging in a Heirloom Oak design. For cabinet and woodworking shops planning projects around Heirloom Oak surfaces, this edge banding provides a matching PVC strip for raw panel edges across doors, cases, and shelves. Add this 315431-312 PVC edgebanding to the job list when a Heirloom Oak appearance and consistent edge build are required across multiple components.
Sold In: 1 Roll