Edgebanding PVC Nomad Oak describes a PVC edge banding in a Nomad Oak design, so it finishes raw panel edges to visually match Nomad Oak surfaces. The 1mm thick profile provides a solid edge treatment that helps cover substrate transitions on cabinet and furniture panels. The 15/16 inch width gives coverage across common 3/4 inch panels while allowing trim tolerance along the edge. The 600 FT length supplies a continuous run suitable for multiple jobs or larger production runs without frequent roll changes. As edge banding in the Edgebanding & Surfacing category, it fits into workflows where exposed edges on panels need to be closed off and visually matched. The Rehau, Inc. brand identification ties this material to an established manufacturer, which supports consistent ordering by name and part number. The manufacturer part number 315431-313 gives a precise reference for repeat purchasing when a specific Nomad Oak edge match is required.
This PVC Nomad Oak edge banding is specified at 1mm thickness, giving installers a known profile for routing or trimming after application. The 15/16 inch width is sized to span the edge and a portion of the face of common panel thicknesses, which supports clean visual alignment during application. With 600 FT provided under a single part number, shops can plan extended runs on cabinet, casework, or furniture jobs using the same Nomad Oak edge design. As a product in the Edgebanding, PVC category, it suits workflows where PVC material is selected for edging panels that present a Nomad Oak appearance.
This edge banding is identified as PVC Nomad Oak, so it fits projects where exposed panel edges need to visually coordinate with a Nomad Oak surface. The 15/16 inch width provides coverage suitable for edging work on cabinet boxes, shelves, and similar panel-based assemblies where a standard panel thickness is used. With 600 FT available in one continuous length, it supports both shop production and larger one-off projects that repeat the same Nomad Oak look from piece to piece. The edge banding resides in the Edgebanding & Surfacing category, placing it alongside other surfacing materials used when finishing panel edges on woodworking and casework jobs. Because it is classified specifically as Edge Banding, it serves the role of closing off cut panel edges so substrates are hidden and a consistent Nomad Oak appearance carries across the panel faces and edges.
The 1mm thickness of this PVC edge banding provides a consistent trimming reference, which helps produce uniform edges when panels are processed with standard edging and finishing equipment. The 15/16 inch width allows a margin beyond the panel thickness, giving installers working room for precise alignment along the edge line before trimming. With 600 FT specified for this product, shops can standardize on a single Nomad Oak edge solution for a run of cabinets or furniture without changing to a different lot during the job. The Rehau, Inc. naming and manufacturer part number 315431-313 connect every order to the same defined material, supporting repeatable color and design matching when panels or components are produced at different times but need to share the same Nomad Oak edge.
The edge banding is described as PVC Nomad Oak, so it uses PVC material with a Nomad Oak design for finishing panel edges to match that appearance.
The Rehau Nomad Oak edgebanding has a 15/16 inch width, giving coverage across typical panel edges with room for alignment and trimming along the face.
This PVC edge banding is 1mm thick, providing a defined edge profile that supports consistent trimming and finishing operations on edged panels.
This Nomad Oak edge banding is specified at 600 FT in length, allowing extended edging runs on cabinet or furniture projects using a single product.
The Nomad Oak strip is classified as Edge Banding in the Edgebanding & Surfacing category, so it is intended for finishing exposed panel edges.
The manufacturer part number 315431-313 uniquely identifies this 1mm, 15/16 inch, 600 FT PVC Nomad Oak edge banding for accurate repeat orders.
This Edgebanding, PVC Nomad Oak 1mm Thick, 15/16 inch Width x 600 FT gives a defined option for finishing panel edges in a Nomad Oak look. The combination of 1mm thickness, 15/16 inch width, and 600 FT length supports both shop production and detailed cabinet or furniture builds where a consistent Nomad Oak design is required across edges. Referencing Rehau, Inc. and the part number 315431-313 allows straightforward selection when specifying or reordering this exact edge banding through Wurth Baer Supply.
Sold In: 1 Roll