PVC craft elm edgebanding from Rehau, Inc. is a PVC edge banding designed to finish exposed panel edges with a consistent craft elm appearance. The 1mm thickness builds a solid edge profile that covers raw board edges for a finished look. The 15/16 inch width matches common panel thicknesses so the banding covers the face edge with slight trim allowance for flush routing. The 600 ft length supplies extended runs from a single roll, which supports production work and reduces changeovers on edgebanders. As an edge banding in the Edgebanding & Surfacing category, it is suited to covering and protecting cut edges in woodworking and cabinet projects. The PVC material gives a uniform surface along the entire 600 ft run, helping maintain consistent appearance from part to part.
This Rehau, Inc. edge banding measures 15/16 inch in width, giving coverage across standard panel edges with allowance for trimming to a flush line. The 1mm thickness provides a measurable edge that can be processed by typical edgebanding machinery and trimmers. As a PVC craft elm edgebanding, it is intended for use wherever a craft elm look is required on exposed edges. The 600 ft roll format supplies enough length to run multiple cabinets or casework sections without changing material source, supporting consistent fit and appearance from start to finish.
This edge banding sits in the Edgebanding & Surfacing category, positioning it for finishing raw edges on panels in woodworking and cabinet environments. The craft elm finish aligns the edge appearance with craft-elm-style surfaces, supporting coordinated faces and edges on casework. With a width of 15/16 inch, the banding is sized for use along exposed sides, tops, and bottoms of panels cut to common thicknesses. The 600 ft roll length makes it well suited to shop runs where the same craft elm edge is repeated across doors, drawer fronts, or carcass parts.
The 1mm thick PVC material gives the edge enough substance for clean trimming and scraping, which helps produce straight, chip-free edges. Because the width is 15/16 inch, installers can apply the banding with a slight overhang and then trim both faces back to the panel, promoting accurate alignment along the full edge. Being a defined edge banding product, it focuses on covering the exposed core of panels, which supports long-term use by shielding the core edge. The Rehau, Inc. branding and specific part number 315431-322 identify this exact craft elm variant, helping shops repeat the same appearance on future work without variation.
The craft elm edge banding is PVC, which provides a uniform synthetic surface along the edge and supports consistent processing on edgebanding equipment.
The Rehau PVC craft elm edgebanding is 15/16 inch wide, giving coverage across common panel edges with enough overhang for trimming to a flush finish.
The 1mm thickness indicates a substantial PVC layer at the edge, which supports clean routing, scraping, and a solid-feeling finished edge on cabinets and panels.
The PVC edge banding roll is 600 ft long, providing extended length for multiple cabinet or panel runs from the same material source.
This craft elm edge banding suits woodworking and cabinet projects where exposed panel edges need a craft elm appearance that coordinates with matching surfaces.
Part number 315431-322 identifies this specific 1mm thick, 15/16 inch wide, 600 ft PVC craft elm edge banding for accurate product selection and reordering.
This PVC craft elm edgebanding from Rehau, Inc., supplied by Wurth Baer Supply, combines 1mm thickness, 15/16 inch width, and a 600 ft roll length to support shop and jobsite needs. The sizing, material, and color description define how it will finish exposed edges on cabinets and panels. For projects calling for a craft elm look on raw panel edges, this edge banding offers a clearly specified option ready to integrate into established edgebanding workflows.
Sold In: 1 Roll