Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC Vineyard Oak edgebanding 24mm gives installers a dedicated edging material in a Vineyard Oak design for finishing exposed panel edges, so cabinet sides, shelves, and casework can match the selected decor from end to end. The 1.2mm thick PVC construction supplies a substantial edge profile, so the banding can bridge minor panel edge imperfections while presenting a solid finished look along the run. The 24mm width, noted as 15/16 inch in the SAP description, is sized for common panel thicknesses, so it can cover the panel face and edge with controlled overhang for trimming. A 600 FT length provides a continuous supply for production or multi-cabinet projects, so installers can run longer pieces without frequent coil changes. The specified Rehau, Inc. edge banding classifies this as a purpose-made edging component, so it fits into standard edging workflows in woodworking shops.
The specified 24mm width on this PVC Vineyard Oak edgebanding gives installers working room on both sides of a typical panel edge, so they can position the strip, bond it, and trim flush without starving either face. The 1.2mm thickness provides a defined shoulder at the edge, so trimming equipment can track reliably along the material and produce a straight, clean line. The 600 FT roll length allows long continuous runs, so fewer splices are required on tall sides or extended shelving, reducing points that might otherwise need extra touch-up. With the product identified as edge banding in the edgebanding and surfacing category, it is oriented toward standard edge-applied installation processes common in cabinet and casework production.
This PVC Vineyard Oak 1.2mm thick edgebanding, at 24mm width, is suited to finishing exposed edges on panels used in cabinets, shelving, and other casework where a Vineyard Oak appearance is specified. The 15/16 inch width designation in the SAP description reflects its sizing for typical panel formats, so installers can apply it along vertical sides, horizontal shelves, and top or bottom panels while holding a consistent reveal. Because the roll provides 600 FT of material, it can support single large installations or several smaller jobs while maintaining the same Vineyard Oak look across each edge. As an edge banding classified under edgebanding and surfacing, it plays the role of the visual and protective outer strip along raw board edges.
The 1.2mm thickness of this Rehau, Inc. PVC edge banding gives trimming tools a well-defined material to reference, so cut edges tend to stay straight along the full length rather than diving into the panel core. The 24mm width allows installers to center the strip on the substrate with a small, predictable overhang, so both front and back faces can be trimmed evenly for a balanced edge profile. The consistent Vineyard Oak decor across the 600 FT roll helps mitered corners and long runs read as a single continuous surface, reducing visual breaks between cabinet components. With the product identified by manufacturer part number 315608-027, shops can reorder the same specification, so future repairs or additions can use edging with the same measured thickness, width, and Vineyard Oak appearance.
This Vineyard Oak PVC edgebanding is 24mm wide, noted as 15/16 inch, and 1.2mm thick, so it covers typical panel edges with enough material for clean trimming on both faces.
The roll length is 600 FT, so installers can run extended edges or multiple cabinets from a single roll and keep the Vineyard Oak appearance consistent across the project.
This Vineyard Oak edging is made from PVC, so it serves as a dedicated synthetic edge banding suitable for standard edgebanding equipment and common woodworking shop processes.
This 24mm Vineyard Oak PVC banding is branded by Rehau, Inc., so it ties to their edge banding product class for use in cabinet and casework edge finishing workflows.
The 1.2mm thickness provides a substantial edge layer, so trimming tools can reference the banding and produce a defined, straight edge profile along cabinet panels.
Part number 315608-027 identifies this specific Vineyard Oak PVC edgebanding configuration, so shops can match the same thickness, width, length, and decor on repeat orders.
This Edgebanding, PVC Vineyard Oak 1.2mm Thick, 24mm Width x 600 FT from Rehau, Inc. gives woodworking shops a defined Vineyard Oak edge solution for cabinets and casework. The combination of 1.2mm thickness, 24mm width, and 600 FT length supports consistent edging results across small runs or larger installations. For projects calling for a Vineyard Oak appearance on exposed panel edges, this dedicated edge banding allows installers to align material choice, workflow, and finished look in a single specification.
Sold In: 1 Roll