PVC Harvest Walnut edgebanding is a PVC edge banding that covers and finishes exposed panel edges, so cabinet and furniture projects present a uniform Harvest Walnut appearance along the edge. The 1.2mm thick construction provides a substantial edge profile, which supports a solid feel where edges are exposed to view. The 15/16 inch width gives coverage for standard panel thickness with a bit of overhang, letting installers trim back to a precise edge line. The 600 FT length on a single roll supports longer production runs, which helps reduce roll changes during repetitive cabinet or casework builds. As an edge banding in the Edgebanding, PVC category, it is suited to surfacing projects that rely on PVC materials. The product is supplied under the Rehau, Inc. brand, giving shops a clearly identified source when matching existing Harvest Walnut installations or ordering repeat material.
The 1.2mm thickness of this PVC Harvest Walnut edge banding affects how the edge transitions from the panel face, which matters when aligning doors and drawer fronts in a run. The 15/16 inch width gives working tolerance during installation, so installers can apply the banding slightly proud of the surface and trim it flush after bonding. The 600 FT continuous length helps plan installation sequences, because a single roll can serve multiple cabinets or casework sections without stopping to change material. Being an Edge Banding in the Edgebanding & Surfacing category defines its role at the edge of panels, which guides how it is staged near edge banding equipment during installation work.
This PVC Harvest Walnut 1.2mm thick, 15/16 inch width x 600 FT product is used on exposed edges of panels where a Harvest Walnut appearance is desired, so casework and cabinetry gain a consistent look from face to edge. As Edge Banding in the Edgebanding, PVC category, it fits into projects that rely on PVC edgebanding for finishing melamine, laminate, or similar surfaced boards in woodworking environments. The extended 600 FT length suits batch runs of cabinets, closets, or furniture components, allowing a single roll to support multiple carcasses or door sets. Because it carries the Rehau, Inc. brand and the manufacturer part number 315608-275, it is identifiable in shop documentation when specifying Harvest Walnut edges on drawings or cut lists.
The 1.2mm thickness on this Rehau, Inc. PVC Harvest Walnut edgebanding gives enough material at the edge to stand up visually next to the panel face, which supports a defined joint line on cabinet doors, drawer fronts, and vertical panels. The 15/16 inch width offers extra coverage beyond standard panel thickness, so installers can align the strip while leaving minor margin for trimming instead of chasing a perfectly flush placement on first pass. This width-to-thickness combination helps keep edges uniform across a project set when the same material is run through edge banding equipment. The 600 FT roll length supports an uninterrupted feed on automated or manual edge banding stations, which reduces handling interruptions during repetitive edging of cabinet boxes, tall panels, or shelving components. The clear identification as Edge Banding in the Edgebanding & Surfacing category ties it directly to edge-finishing steps in the workflow, so crews can stage this specific Harvest Walnut PVC edging at the appropriate station for repeatable results.
This Rehau, Inc. PVC Harvest Walnut edge banding is 1.2mm thick, 15/16 inch wide, and supplied in a 600 FT length, which defines how it covers and finishes exposed panel edges.
The 1.2mm thickness provides a noticeable edge profile, which gives cabinet and furniture edges a more substantial transition from face to edge in Harvest Walnut projects.
The 15/16 inch width offers slight overhang on typical panels, so installers can apply the banding, then trim it back to achieve straight, flush finished edges.
The 600 FT roll length supports longer production runs, allowing multiple cabinets or panels to be edged without frequent material changes on the edgebander.
As Edge Banding in the Edgebanding & Surfacing category, this PVC Harvest Walnut product finishes exposed panel edges as part of standard woodworking edge-finishing steps.
This Rehau, Inc. PVC Harvest Walnut edge banding is identified by manufacturer part number 315608-275, which supports consistent specification and reordering.
This PVC Harvest Walnut 1.2mm thick, 15/16 inch width x 600 FT edge banding from Rehau, Inc. provides defined dimensions and a clear color identity for finishing exposed panel edges. When edging cabinets, furniture, or casework that call for Harvest Walnut tones, using this Edge Banding from the Edgebanding & Surfacing category aligns the edge treatment with the intended appearance. Selecting this specific 600 FT roll supports continuous edging on shop projects that rely on PVC Harvest Walnut edgebanding.
Sold In: 1 Roll