PVC stone grey edgebanding 23mm gives you a 1mm thick PVC edge in a controlled stone grey color across long runs, so cabinet and furniture edges match the panel tone for a uniform finished look on visible work.
The 23mm width matches common 15/16 inch edge coverage, so you can cover standard panel thickness while still having enough material to trim cleanly on both faces without exposing the core material in the finished installation.
The 328 ft length supplied on the roll supports longer production runs, so shops can run multiple cabinets or casework pieces in the same color without interrupting the workflow mid-job to change to another coil of edging.
This product is classified as edge banding within edgebanding and surfacing, so it is intended specifically for covering raw board edges rather than broad surfaces, keeping its role focused and predictable in a cabinet or casework build.
The product is manufactured by Rehau, Inc., so users working from Rehau color libraries or part lists can align this edge banding with their existing Rehau-based specifications by part description and color reference.
The 23mm width identified in the description corresponds closely to 15/16 inch coverage, so it suits edging operations on panels in that thickness range where small overhang is needed for trimming flush to the faces.
The 1mm thick construction defines how the band responds to trimming knives and edge routers, so installers can dial in settings for a 1mm profile and expect similar performance from length to length along cabinet parts.
The edge banding is supplied as a continuous 328 ft roll, so edge banders and manual trimmers can be set up once for this width and thickness, then run multiple pieces without reconfiguring for another size mid-project.
The product category of edgebanding, PVC clarifies that this is for application to exposed board edges rather than field lamination, so the geometry and handling are tuned to edge finishing steps in cabinet and furniture builds.
This edge banding is defined as a PVC product within the edgebanding and surfacing category, so it is intended for finishing the exposed edges of panels used in cabinetry, furniture, and other casework built from board materials.
The stone grey color specified in the web description sets it up for projects that use grey-toned panels, so when installers apply this band to cabinet sides, shelves, or doors, the visible edges echo the same stone grey aesthetic.
The 23mm width and 1mm thickness make it suitable for edging work on panels sized around 15/16 inch thickness, so it can be applied to vertical gables, horizontal shelves, and similar components that share that edge dimension.
The 328 ft length supports use in larger jobs such as multi-cabinet runs or a series of closets, so one roll can service many linear feet of edge work while maintaining the same width, thickness, and color from piece to piece.
The product name and SAP description both refer to stone grey and 1mm thickness, so shops standardizing on these parameters can store and call up this banding for recurring cabinet lines that repeat the same color and build-up.
The Rehau, Inc. brand listing ties this edge banding into the Rehau ecosystem, so operations referencing Rehau product catalogs can align this specific color and thickness with panel programs or design schemes specified under that brand.
The defined 1mm thickness is consistent across the product description, so once trimming tools are set for a 1mm edge, installers can expect similar resistance and chip formation, supporting predictable cleanup along straight and curved edges.
The 23mm width repeated in the description gives a known amount of overhang beyond a 15/16 inch panel face, so edge banding machines and manual jigs can be tuned to that coverage and reused from cabinet to cabinet without re-measuring.
The 328 ft length in the specification supports long, continuous runs through automatic edge banders, so there are fewer splice points along cabinet components, which helps keep color and sheen consistent across doors, sides, and shelves.
The identification as PVC stone grey signals that both the material and color are fixed, so operators can run test pieces once for this exact band, then repeat settings on production parts without compensating for different materials or hues.
The manufacturer part number 327875-031 gives a precise reference for ordering and reordering, so when a shop dials in settings for this banding, they can call out this code in job notes and expect the same width, thickness, and color next time.
The classification under edge banding confirms its role at the panel perimeter, so designers and builders can treat it as the final visible edge surface in their drawings, cut lists, and machining programs for cabinet and furniture projects.
The edgebanding has a 23mm width, so it is suited to covering edges around 15/16 inch thick panels while leaving enough material for trimming flush to both faces.
The Rehau PVC stone grey edgebanding is 1mm thick, so trimming tools and edge banders can be configured specifically for a 1mm edge profile across all processed parts.
The roll length is 328 ft, so shops can edge multiple cabinets or furniture components in the same stone grey color without changing to another coil during a typical job.
This 23mm stone grey edging is made from PVC, so it aligns with PVC-focused edgebanding and surfacing workflows commonly used in cabinet and furniture production.
This 327875-031 edge banding is manufactured by Rehau, Inc., so it fits into projects that specify Rehau-branded PVC edging in stone grey color.
This PVC edgebanding is classified under edgebanding and surfacing as edge banding, so it is used specifically to finish raw edges on panels in cabinet and furniture builds.
This Rehau, Inc. PVC stone grey 1mm thick, 23mm wide edgebanding in a 328 ft roll ties color, thickness, and width into a single part, so cabinet and furniture shops can match drawings and production settings to one consistent edging solution.
Sold In: 1 Roll