Edgebanding PVC Mission Maple 1.5mm identifies this Rehau, Inc. edge banding as a PVC strip in a Mission Maple design, so it finishes exposed panel edges to match a Mission Maple layout on cabinets or furniture projects. The 1.5mm thick construction gives a substantial edge profile that covers raw panel edges, supporting a solid finished appearance along cabinet sides, doors, or shelving. The 1-3/4 inch width matches common panel thickness with overhang to trim, helping installers cover the full edge while maintaining a consistent reveal. The 500 FT length on this roll supports repetitive production runs or multiple jobs from a single product, which supports workflow on shop-based or on-site fabrication. As edge banding from Rehau, Inc., this product aligns with professional woodworking applications where consistent material identity and appearance are important across multiple panels.
This edge banding in 1.5mm thickness and 1-3/4 inch width fits panel-edge applications where the installer needs coverage across the full edge with some trimming margin, so it integrates into common edge banding workflows. The PVC material designation supports use in typical interior woodworking environments where PVC edgebanding is specified for cabinets or furniture components. The 500 FT length is suited for production-style application, allowing shops to process multiple carcasses or door sets with the same Mission Maple material reference. With its edge banding product class and PVC edgebanding category, this product serves as the edge treatment component in a broader cabinet or furniture assembly using Mission Maple surfaces.
As PVC edgebanding in a Mission Maple identification, this Rehau, Inc. product is applied along exposed panel edges so the edge tone aligns with Mission Maple surfaces in the project. The 1-3/4 inch width allows the strip to span the panel thickness and extend slightly past both faces, so installers can trim back to a clean, flush edge. This width pairing with the 1.5mm thickness creates an edge profile that visually ties into the overall panel surface while covering the raw core. The edge banding product class means it is intended for use on edges of panels, doors, or shelving rather than broad surface lamination, directing it toward finishing cabinet boxes, casework, or furniture parts. The 500 FT roll format supports continuous runs through edge banding machinery, so shops can run sequential panels with the same Mission Maple material to maintain consistency.
The 1.5mm thickness offers enough material to create a substantial edge while remaining within typical edge banding processing ranges, which supports consistent trimming and scraping operations after application. The 1-3/4 inch width directly influences how the band sits on standard panel edges, giving margin for alignment while minimizing waste during trimming. The 500 FT length reduces the number of roll changes required on edgebanding equipment, which helps maintain stable machine settings and color continuity on long or repeated runs. Identifying the product with manufacturer part number 333802-005 anchors it to a specific Rehau, Inc. reference, which simplifies reordering the same Mission Maple edge banding to match panels or replacement components on future projects. The classification under Edgebanding & Surfacing and specifically Edgebanding, PVC places this product within a well-defined category for shops standardizing material lists for cabinet and woodworking production.
This edge banding is PVC, so it functions as a plastic edging material suited for typical interior cabinet and furniture edge applications specified for PVC edgebanding.
The edge banding is 1-3/4 inch wide, giving coverage across common panel edges with extra width for trimming to a flush, clean edge profile after application.
This edge banding is 1.5mm thick, providing a solid edge profile that supports standard trimming, scraping, and finishing operations used in edgebanding workflows.
The roll length is 500 FT, so shops can edge multiple cabinets or furniture components in Mission Maple from one roll for consistent appearance.
This edge banding is manufactured by Rehau, Inc., giving it a defined brand source within the Edgebanding, PVC product category.
The manufacturer part number is 333802-005, allowing straightforward reference when matching or reordering this specific Mission Maple PVC edgebanding.
This PVC edge banding from Rehau, Inc. in a Mission Maple identification, 1.5mm thickness, and 1-3/4 inch width x 500 FT length gives a defined option for finishing panel edges. For cabinet, furniture, or casework projects laid out in Mission Maple, this edge banding provides matching edge coverage across multiple parts using the same 333802-005 reference. Use this product when a dedicated Mission Maple PVC edgebanding is required to bring raw panel edges in line with the overall project appearance.
Sold In: 1 Roll