Edgebanding, PVC, Mountain Oak 1.5mm Thick, 1-3/4" Width x 500 FT

Edgebanding PVC Mountain Oak 1.5mm For Clean Edges

Edgebanding PVC Mountain Oak 1.5mm describes a PVC edge banding in a Mountain Oak design that finishes raw panel edges, so cabinet and furniture projects gain a coordinated, professional-looking edge treatment. The 1.5mm thickness gives the banding a substantial profile that covers cut edges effectively, which supports consistent visual transitions between panels and banded edges. The 1-3/4 inch width matches typical panel thickness and overhang needs, allowing trimming back to a flush edge. The 500 FT length provides extended run capability from a single roll, which helps larger jobs maintain the same color and material from start to finish. As a PVC edgebanding in a defined Mountain Oak style, it ties directly into surfacing choices that call for this look, so fabricators can match design intent across doors, drawer fronts, and exposed casework edges.

Key Mountain Oak Edgebanding Details For Projects

• The PVC construction defines this as a plastic-based edgebanding that pairs with common panel materials, supporting routine cabinet and furniture edge finishing workflows where synthetic banding is preferred.
• The Mountain Oak designation identifies the visual style, allowing edges to coordinate with surfaces that use the same Mountain Oak look so finished runs maintain design continuity across panels.
• The 1.5mm thickness sets the material in a mid-range banding profile that can cover raw edges with enough body to handle standard trimming operations while maintaining a solid visual line.
• The 1-3/4 inch width allows coverage across typical panel thicknesses plus slight overhang, giving installers room to trim to a clean flush edge without exposing core material.
• The 500 FT roll length supports extended production runs from a single roll, helping shops handle multiple cabinets or larger furniture projects while holding the same color and thickness across all edges.
• The Rehau, Inc. brand and manufacturer part number 333802-006 identify the specific source and variant, supporting consistent reordering when the same Mountain Oak 1.5mm x 1-3/4 inch PVC edgebanding is required again.

Edgebanding Dimensions Supporting Straightforward Application

The 1-3/4 inch width gives this PVC edgebanding enough coverage to span standard panel thicknesses used in cabinetry and casework, which helps during application because the banding can be aligned and then trimmed back to the finished face. The 1.5mm thickness provides a defined edge profile that works with common edge-banding equipment and trimming tools, so installers can bring the edge down flush with the panel surface. With a continuous 500 FT length, the roll format supports feeding into edge-banding setups or manual application over longer stretches, allowing fabricators to run multiple components in the same session without changing material.

Using Mountain Oak PVC Edgebanding In Woodworking

Where This Rehau Mountain Oak Edgebanding Fits Best

This PVC Mountain Oak edgebanding is positioned for use wherever raw panel edges need to match a Mountain Oak visual theme, such as cabinet sides, shelving edges, and casework components using coordinated surfacing. The 1-3/4 inch width allows it to work with panels that fall within that span, so installers can center the banding over the exposed edge and trim the excess. As an edge banding in the Edgebanding & Surfacing category, it aligns with laminated or surfaced panels that rely on a compatible edge treatment to complete the assembly. The 500 FT roll format supports both shop-based runs of cabinets and ongoing fabrication work, so repeated projects can draw from the same specification without shifting appearance midstream.

Why These Edge Banding Details Support Consistency

The defined 1.5mm thickness helps maintain consistent edge appearance across every panel using this Rehau PVC edgebanding, because each length carries the same material build and feel. The Mountain Oak designation ensures the edge presentation stays tied to that particular design choice, which is important when doors, drawer fronts, and cabinet cases all share visible edges. The manufacturer part number 333802-006 connects the exact Mountain Oak, 1.5mm, 1-3/4 inch, 500 FT configuration to ordering and inventory systems, supporting repeatable selection each time the same look and size are required. Classified under Edgebanding, PVC and Edge Banding, this product clearly serves as the finishing element for exposed edges, helping shops deliver panels that present as completed surfaces rather than raw core material at their perimeters.

Common Questions About Mountain Oak PVC Edgebanding

Select This Mountain Oak Edge Banding For Matching Runs

This PVC Mountain Oak 1.5mm thick, 1-3/4 inch wide, 500 FT edge banding from Rehau, Inc. gives woodworking shops a defined way to finish exposed edges in the same Mountain Oak look used on surfaces. Using a consistent part number and size helps projects align visually from one panel to the next, so doors, drawer fronts, and cabinet cases share the same edge dimension and style. For work that specifies Mountain Oak surfacing with a PVC edge treatment, this edge banding provides the matched dimensions and appearance needed to keep production moving on a single, repeatable specification.