Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau PVC edgebanding gives you a dedicated edge treatment solution when you need a PVC profile that is identified as paintable in the SAP description. The 15/16 inch width provides coverage suited to many panel thicknesses where a near-full overlay edge is desired, helping you align with common casework dimensions. The 1mm thickness creates a solid edge profile that stands up to normal handling while keeping the edge visually clean after trimming. The PVC material establishes a consistent synthetic edge surface that differs from raw board, so you can plan your finishing workflow around a stable substrate. The 600 foot length, as described in the SAP data, supports longer production runs or multiple jobs from a single reel, reducing changeovers during edge application. The Rehau, Inc. branding identifies this as part of a recognized edge banding line within professional woodworking supply.
The 15/16 inch width on this Rehau PVC edgebanding gives you extra material beyond many standard panel faces, which supports accurate alignment during application and trimming. That width margin lets you position the band confidently without chasing a perfectly centered placement on every pass. The 1mm thickness offers a defined edge profile that behaves predictably when cut or trimmed, which supports smoother passes on your edge trimmer. Because the product is specified as PVC, you can plan your machining and finishing tools around a plastic edge rather than raw wood composite. The 600 foot length allows you to run longer cabinet or fixture sequences in one setup, which helps keep joints between lengths off highly visible edges when layouts allow.
This Rehau PVC edgebanding, identified in the SAP description as 15/16 inch by 1mm and 600 feet, suits projects where you want a consistent PVC edge across multiple panels. The width supports covering panel faces with a bit of overhang, so you can trim back to a straight line after bonding. The 1mm thickness supplies a noticeable, solid edge that is well suited to typical cabinet and furniture components where a thin, controlled profile is preferred over very thick edges. The PVC construction gives you a homogeneous edge surface from piece to piece, supporting predictable behavior on edgebanders and trimmers. With the product called out as paintable in the SAP data, it aligns with projects where the finished edge is intended for a paint-oriented system identified for this material.
The 15/16 inch width, when paired with common panel sizes, helps limit exposed substrate after trimming, which supports a more continuous edge line along doors, drawer fronts, and case components. The 1mm thickness strikes a balance between a low-profile edge and enough material for clean trimming, helping reduce the risk of cutting through to the core when dialed in correctly. The PVC material behaves differently from raw board, so its consistent density across the roll supports more repeatable machine settings once tuned for this edge banding type. The 600 foot length lets you standardize on a single product code, 348076-001, across multiple pieces in a job, which helps maintain the same edge profile and material behavior from the first panel to the last.
This Rehau PVC edgebanding is specified in the SAP data as 15/16 inch wide and 1mm thick, which supports coverage of many panel edges while allowing controlled trimming.
The 348076-001 PVC edgebanding is described as 600 feet in length, supporting extended cabinet or fixture runs from a single roll in production environments.
The 348076-001 edge banding is identified as PVC, giving you a synthetic edge surface that behaves consistently during machining and finishing steps.
The SAP description lists this Rehau PVC edgebanding as paintable, aligning it with applications where a PVC edge identified for paint use is required.
The 1mm thickness supplies enough PVC material for trimming and finishing while keeping a low-profile edge, supporting a clean transition between face and edge.
The 15/16 inch width provides a small overhang on many panel edges, helping you trim back to a straight, fully covered edge without exposing the core.
This Rehau, Inc. PVC edgebanding, identified as 348076-001, combines a 15/16 inch width, 1mm thickness, and 600 foot length for edge treatment on casework and similar projects. With the SAP description noting paintable, it suits jobs where a PVC edge specified for paint use is needed. The dimensions and PVC construction support consistent behavior on your edge equipment and a uniform profile across panels, helping you maintain a steady finish standard from piece to piece. For professional woodworking environments sourcing from Wurth Baer Supply, this edge banding offers a defined product code you can specify into repeatable shop workflows.
Sold In: 1 Roll