Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC Shaker Cherry edgebanding provides a PVC edge treatment in a Shaker Cherry color so panel edges match the face material for a consistent finished look. The .018 inch thickness gives a slim band that covers raw substrate while keeping a low-profile edge line. The 15/16 inch width covers typical 3/4 inch panels with margin, which helps hide minor alignment variation at the edge. The 600 FT length is suited to larger cabinet or furniture runs where a single roll supports multiple pieces, reducing changeovers during production. As a PVC edge banding product, it belongs in edgebanding and surfacing work where exposed edges on boards or components need covering. The Rehau, Inc. branding and specific 716041-135 part number tie this roll to a known PVC edgebanding line so repeat projects can specify the same material.
The 15/16 inch width on this PVC Shaker Cherry .018 inch thick edge banding is built around common panel dimensions, so it spans standard thickness panels with trim room on both faces. The .018 inch gauge keeps the edge lean, which is useful where a slimmer edge buildup is desired along cabinet or furniture parts. As an edgebanding and surfacing item in the PVC category, it serves edge finishing tasks on boards and components rather than acting as a structural piece. The 600 FT length provides extended run capacity, which matters when setting up for production work on repeated Shaker Cherry projects without frequent material changes.
This Rehau PVC Shaker Cherry .018 inch thick, 15/16 inch width x 600 FT edge banding fits work where exposed panel edges need finishing to coordinate with a Shaker Cherry surface. The color designation supports cabinet parts, furniture components, or casework panels built around a Shaker Cherry look, so edges visually connect with the faces. Its classification as edgebanding and surfacing positions it on the outer edges of panels rather than interior joints, helping transition from core material to visible surfaces. On higher volume jobs, the 600 FT roll length aligns with shop production flow, so runs of Shaker Cherry cabinets or fixtures draw from a single continuous supply. The defined width also lends itself to edges on typical carcass sides, shelves, and doors sized around 3/4 inch material where the 15/16 inch strip can be trimmed for a flush finish.
The .018 inch PVC thickness supports consistent trimming along the edge after bonding, since the thin profile creates a modest lip to flush back without a bulky shoulder. This helps produce a clean, tactile transition from face to edge on cabinetry and furniture pieces. The 15/16 inch width gives working tolerance on each side of a standard panel, so slight panel variation still ends with full coverage once the excess is trimmed. Identifying this roll by manufacturer part 716041-135 makes it straightforward to repeat the same Shaker Cherry edge banding on follow-up jobs, which keeps color and thickness consistent over time. Being part of the PVC edgebanding category means the material is suited to common woodworking environments where panel edges are finished to match decorative surfaces in a predictable way.
The edgebanding is .018 inch thick and 15/16 inch wide, so it covers standard 3/4 inch panels with room to trim for a flush, finished edge on cabinets or furniture parts.
The roll length is 600 FT, giving shops enough material to handle extended runs of Shaker Cherry panel edging without frequent material changeover during production.
This product is PVC edge banding, so it serves as a plastic edge treatment on panel sides where a non-wood strip is preferred to finish exposed cores.
This PVC edgebanding for cabinets is used on exposed panel edges in Shaker Cherry projects, tying carcass sides, doors, and shelves visually to the matching surface.
The Shaker Cherry description identifies the color tone, so the edge banding visually coordinates with Shaker Cherry surfaces for a consistent appearance at panel edges.
The .018 inch thickness provides a slim PVC edge that trims back cleanly, helping installers create a neat, low-profile transition from face to edge on panels.
The Rehau PVC Shaker Cherry .018 inch thick, 15/16 inch width x 600 FT edge banding offers defined dimensions and a Shaker Cherry tone for panel edge finishing. For projects built around Shaker Cherry surfaces, its width, thickness, and roll length align with cabinet and furniture workflows that call for consistent, repeatable edges across multiple components.
Sold In: 1 Roll