PVC Glamout Cherry edgebanding is a Rehau, Inc. edge banding designed to finish exposed edges on panels in a Glamout Cherry tone. The .018 inch thick PVC construction covers raw panel edges so the job has a consistent finished look along cabinet, furniture, or fixture runs. The 15/16 inch width works across standard panel thicknesses, giving coverage over the edge and a small margin for trimming so installers can flush the banding to the surface. The 600 FT length in a single roll supports longer production runs or multiple projects without changing rolls as often, which helps maintain color continuity from piece to piece. As part of the Edgebanding & Surfacing category, this product fits into typical woodworking workflows where PVC edge banding is specified. The Rehau identification under manufacturer part number 716041-197 provides a repeatable reference when the same Glamout Cherry finish is required on future jobs.
The Rehau PVC edgebanding in Glamout Cherry is specified at .018 inch thickness, which works with standard trimming settings and supports clean cuts without removing excess material. The 15/16 inch width offers enough coverage so the tape can be centered on the panel edge, then trimmed back to flush on both faces, which supports straight lines on doors and carcass edges. With a total length of 600 FT, one roll covers many linear feet of edge work on cabinets, shelving, or furniture components before a new roll is needed. As edge banding within the Edgebanding & Surfacing class, this product is suited to jobs where PVC edging is required for a finished appearance on panel edges.
This PVC edge banding is defined as Edgebanding, PVC Glamout Cherry .018 inch Thick, 15/16 inch Width x 600 FT, positioning it for use anywhere a Glamout Cherry edge is specified on panel work. The 15/16 inch width allows coverage of typical casework and shelving edges so the edge strip can be aligned to the substrate and trimmed, giving a neat transition between surface and edge. Within the Edgebanding & Surfacing category, it fits cabinet shops, fixture fabricators, and woodworking environments that rely on PVC edge banding to finish melamine, laminate, or similar panel edges. The 600 FT length aids shop workflows by supporting multiple cabinets, matching components, or several small projects from the same color run.
The .018 inch thickness gives a thin PVC profile that responds predictably when trimming flush after bonding, which helps maintain a straight visual line along doors and carcass fronts. Because the banding is 15/16 inch wide, installers have a small margin beyond the panel thickness, allowing slight alignment adjustments before trimming to final size, which reduces visible misalignment on finished work. The clearly stated Glamout Cherry identification means that when panels or previous jobs used the same description, this edge banding can be specified again to match the existing appearance. The manufacturer part number 716041-197 offers an exact reference for ordering so the same PVC Glamout Cherry edgebanding can be used across future production runs, which supports consistent shop standards and repeatable results.
This PVC Glamout Cherry edgebanding is .018 inch thick, 15/16 inch wide, and supplied in a 600 FT length, giving thin coverage suitable for standard edge banding and trimming operations.
This edge banding is from Rehau, Inc., identified under manufacturer part number 716041-197, which helps maintain consistency when specifying or reordering the same Glamout Cherry finish.
The .018 inch thickness provides a thin PVC layer that trims quickly and cleanly, which supports smooth edges when using standard edge trimmers or automated edgebanding equipment.
The 15/16 inch width gives coverage over typical panel thicknesses with slight overhang, allowing installers to center the strip and trim both faces flush for a uniform edge.
The 600 FT length supports long edge runs and multiple components from a single roll, which keeps the Glamout Cherry color consistent across larger cabinet or furniture projects.
The part number 716041-197 identifies this specific PVC Glamout Cherry .018 inch thick, 15/16 inch wide, 600 FT edgebanding, giving an exact reference for matching previous jobs or prints.
This PVC Glamout Cherry edgebanding from Rehau, Inc. combines .018 inch thickness, 15/16 inch width, and a 600 FT roll length to support efficient edge finishing on cabinet and woodworking projects. The defined color identity and manufacturer part number 716041-197 give a clear specification when a Glamout Cherry edge is required across matching doors, drawer fronts, and casework. When a project calls for PVC edge banding in this size and finish, choosing this Rehau Glamout Cherry roll helps maintain consistent appearance and predictable trimming performance from one component to the next.
Sold In: 1 Roll