Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding Earthen Warp gives you a defined edge solution for casework and panels using a PVC edge banding material. The Rehau, Inc. branding signals a purpose-made edge banding product, so panels, shelves, and cabinet components receive a consistent edge treatment in a matching Earthen Warp tone that supports uniform appearance across a run of work.
The .018 inch thickness keeps the edge banding slim, which helps panels maintain a flush profile while still covering raw substrate edges in typical woodworking applications. A 15/16 inch width provides coverage for common panel thicknesses in cabinet and furniture work, allowing the banding to sit correctly over the edge without excessive overhang. The 600 FT length is set up for production or multiple projects, so a single roll supports longer jobs or repeated runs where the same Earthen Warp finish is required.
The .018 inch thickness of this PVC edge banding works well where a slim edge is important, because it sits close to the panel face once bonded and trimmed, leaving a subtle transition line along cabinet and furniture edges. With a 15/16 inch width, the banding spans the edge and offers a small margin for trimming, which helps installers cut a clean line without exposing the core material.
The PVC material is suited to common woodworking shop processes, supporting routine trimming and finishing steps after bonding to the substrate. The 600 FT roll length lends itself to set-and-run edging operations, where once the roll is staged you can process many parts in sequence without changing material mid-job.
This edge banding from Rehau, Inc. fits into edgebanding and surfacing work where a PVC edge is preferred on panels. The Earthen Warp designation identifies the color, so it serves projects that call for that specific tone across exposed edges on cabinet or furniture components. With a 15/16 inch width, the banding suits panel edge conditions typically found in casework, shelving, and similar assemblies where the edge needs full coverage and a small trimming margin.
The .018 inch PVC thickness supports applications where a understated edge profile is desired rather than a heavy edge build, such as residential or commercial cabinetry using engineered panels. On long cabinet runs or multiple identical units, the 600 FT roll length lets shops edge many panels in the same material, which supports visual uniformity from unit to unit.
Because this product is categorized as edge banding, it integrates naturally into a workflow that already relies on edgebanders or manual edge banding tools. In a typical woodworking sequence, panels can be cut, drilled, and then edged with this Earthen Warp banding before final assembly, allowing exposed edges to match the chosen finish scheme and giving a consistent look on doors, drawer fronts, and carcass edges.
The combination of .018 inch thickness and 15/16 inch width helps installers create predictable results from panel to panel. The thin profile keeps the transition line tight to the surface, which reduces the visual bulk at the edge once the banding is trimmed and finished. The 15/16 inch width creates a practical balance between coverage and waste, giving enough overhang for trimming without adding unnecessary material at the edge.
The 600 FT roll length supports consistent results over larger batches of work, because every panel in the run can be edged from the same continuous material. That continuity reduces variations in tone along different cabinets or furniture pieces using the Earthen Warp color. The Rehau, Inc. identification connects the banding to a defined manufacturing source, which supports repeat ordering of the same 716041-555 part number when future projects call for matching edges.
For shops focused on workflow, the edge banding format streamlines production: once the roll is loaded, panels can move through an edging stage using a single material specification - .018 inch thick, 15/16 inch wide, Earthen Warp tone - which simplifies setup and record-keeping for repeat jobs.
This PVC edgebanding has a .018 inch thickness, which provides a slim edge profile that supports a neat transition from surface to edge on cabinet and panel work.
The Rehau 716041-555 Earthen Warp edge banding is 15/16 inch wide, giving coverage across common panel edges with enough material for final trimming after bonding.
This PVC edgebanding roll provides 600 FT of material, supporting longer production runs or multiple projects using the same Earthen Warp finish.
This Rehau Earthen Warp material is PVC edge banding, used to cover and finish exposed panel edges in woodworking and cabinet construction.
The .018 inch thickness keeps the banding relatively thin, so once applied and trimmed it creates a subtle, low-bulk edge along cabinet and furniture components.
The Earthen Warp color designation defines the finish tone, helping projects maintain consistent visible edges that align with matching surfaces or design schemes.
The Edgebanding, PVC Earthen Warp .018 inch Thick, 15/16 inch Width x 600 FT from Rehau, Inc. pairs defined dimensions with a specific Earthen Warp tone, so cabinet and woodworking projects can carry a consistent edge treatment from part to part.
By using this 716041-555 PVC edge banding where a .018 inch thick, 15/16 inch wide Earthen Warp edge is needed, shops can align their panel edges with the desired finish scheme while working from a single, production-length roll.
Sold In: 1 Roll