Edgebanding, PVC Millennium Oak .018" Thick, 15/16" Width x 600 FT

Edgebanding PVC Millennium Oak For Finished Edges

Edgebanding PVC Millennium Oak describes a PVC edge banding in a Millennium Oak design, so it covers exposed panel edges to visually match Millennium Oak surfaces along cabinet and furniture runs. The .018 inch thick construction provides a low-profile edge treatment, which supports a clean transition from face to edge on casework and shelving. The 15/16 inch width is sized to cover common 3/4 inch panel edges with trim allowance, giving fabricators working room for flush trimming after application. The 600 FT length is set up for production or multi-job use, reducing changeovers when banding longer runs of parts. This product is classified as edge banding, so it is intended specifically for finishing raw edges rather than large surfaces. The PVC material places it in the PVC edgebanding category, keeping it consistent with other PVC-based trim used in many shop workflows.

Key PVC Edge Banding Details For Shop Use

• The .018 inch thickness keeps the edge profile slim, which helps parts stack and align closely in cabinet assemblies and storage.
• The 15/16 inch width gives coverage past a 3/4 inch core, allowing trimming back to a precise, flush edge line on doors and panels.
• The 600 FT length supports longer production runs, so repeated set-ups on edgebanders or trimmers are reduced over multiple parts.
• The PVC construction aligns with common PVC edgebanding processes, so shops can run it with established equipment and handling routines.
• The Millennium Oak description identifies the visual theme, helping match this banding to Millennium Oak-style panel faces across a project.

Installation Fit For 15/16 x .018 PVC Banding

This PVC edge banding is .018 inch thick, so it behaves like a thin edgebanding that seats closely to panel edges during application. The 15/16 inch width provides sufficient overhang on standard 3/4 inch substrates, which supports accurate trimming operations without exposing the core. Being PVC Millennium Oak edgebanding, it can be run where a Millennium Oak edge appearance is needed along cabinet sides, shelves, and fronts. The 600 FT length makes it suitable for feeding through typical edgebanding workflows over many consecutive parts. As edge banding in the PVC category, it fits into setups configured for PVC materials in woodworking environments.

Using Millennium Oak PVC Edgebanding In Projects

Where This Millennium Oak Edge Banding Fits Best

This edge banding is identified as Edgebanding, PVC Millennium Oak .018 inch Thick, 15/16 inch Width x 600 FT, so it targets edging applications where Millennium Oak panels or components are used. The 15/16 inch width lets it cover the full height of 3/4 inch casework edges with extra material for trimming, which is useful on cabinet sides, shelves, and door edges built from standard thickness panels. Its .018 inch thickness defines it as a thin edgebanding option, making it suited for applications where a subtle edge line is preferred, such as contemporary cabinetry or commercial fixtures. As part of the Edgebanding & Surfacing category under Edgebanding, PVC, it fits workflows focused on finishing raw board edges rather than surfacing broad areas.

Why Dimensions And PVC Material Support Consistent Results

The combination of .018 inch thickness and 15/16 inch width gives a predictable edge profile, so trimming and scraping operations can be standardized from part to part. The PVC construction, specified in the SAP description as 15/16'X.018' MILLENNIUM OAK 600FT PVC, ties it directly to PVC-capable edge processing, which helps maintain consistent behavior under the same heat and pressure settings used for other PVC bands. The 600 FT length means one roll can service many linear feet of panel edges, so runs of cabinet boxes or shelving lines can be processed with the same material sequence for visual continuity. The Millennium Oak identification in both the web and SAP descriptions confirms the decorative intent, aligning the finished edge appearance with Millennium Oak-style faces across an installation.

Common Questions About This PVC Millennium Oak Edgebanding

Select This PVC Millennium Oak Banding For Edge Work

This Rehau, Inc. PVC Millennium Oak edge banding, specified at .018 inch thick and 15/16 inch width x 600 FT, provides a defined combination of material, size, and length for edging Millennium Oak projects. As edge banding in the Edgebanding & Surfacing category, it is suited to covering raw panel edges where a Millennium Oak look is needed. Using this single, identified product across related cabinet or furniture runs helps keep edge dimensions and appearance consistent from panel to panel.