Edgebanding PVC Ebony .018 Thick 15/16 Width x 600 FT is a Rehau, Inc. PVC edge banding that covers and finishes raw panel edges in an ebony tone, giving cabinet and furniture projects a consistent finished edge where cut board material would otherwise be exposed. The 15/16 inch width gives coverage for common panel thicknesses with a bit of margin, helping installers trim flush without exposing the core. The .018 inch thickness provides a thin PVC layer that follows panel lines closely, which supports clean edge definition on straight runs. The 600 foot length on this product supports longer production runs or multiple projects from one roll, which helps keep edge material consistent across a job. As part of Wurth Baer Supply's edgebanding and surfacing offering, this edge banding fits into standard woodworking workflows focused on matching edges to surface design.
This Rehau, Inc. edge banding is classified as PVC edgebanding in the Wurth Baer Supply edgebanding and surfacing category, so it is intended for use on panel edges in cabinetry and related woodworking. The 15/16 inch width works as an overhang dimension relative to common panel thicknesses, giving space for trimming operations after bonding to the edge. At .018 inch thick, the PVC layer is thin enough to follow the edge profile without adding bulk, which can help when aligning with doors, drawer fronts, or adjoining panels. The 600 foot roll length supports shop environments where repeated, consistent edgebanding is applied across many parts, tying the appearance together from one component to the next.
This PVC ebony edge banding from Rehau, Inc., identified by manufacturer part number 716041-573, is positioned for use wherever exposed panel edges in ebony-themed projects need a matching finish. In the Wurth Baer Supply assortment, it sits in the edgebanding and surfacing, PVC edgebanding classification, aligning it with applications on cabinet cases, shelving, and furniture components that use sheet goods. The 15/16 inch width lets fabricators run this banding on typical panel edges with enough material to trim cleanly, which is valuable on cabinet sides, shelves, and door or drawer fronts designed around standard board thicknesses. The ebony color supports dark design schemes, helping edges blend visually with surfaces finished in similar tones across a project layout.
The combination of .018 inch thickness and 15/16 inch width on this PVC edge banding works together to support predictable finishing results. The thin .018 inch PVC profile lays tight to the substrate edge, which helps the final edge line follow the plane of the panel without appearing bulky. The 15/16 inch width provides working excess compared to the panel thickness, giving installers freedom to place the banding and then trim both faces for a flush transition to the surfaces. With 600 feet available on a single roll, shops can run many parts using the same batch of edging, which helps keep color and edge appearance uniform from piece to piece on a job. As a Rehau, Inc. product in the Wurth Baer Supply edgebanding and surfacing lineup, this edge banding slots into existing cabinet and furniture workflows where PVC edging is already part of the fabrication process.
The 716041-573 from Rehau, Inc. is a PVC edgebanding product, so it is used to cover and finish raw panel edges in cabinet and furniture construction.
This PVC ebony edgebanding has a width of 15/16 inch, giving working margin over common panel thicknesses for trimming to a flush finished edge.
This Rehau PVC edgebanding is .018 inch thick, providing a thin profile that follows the edge of the panel closely for a low-profile finished look.
The roll length is 600 feet, allowing multiple cabinets or larger runs of parts to be edged with consistent material from a single roll.
This PVC edgebanding is described as ebony, providing a dark edge appearance that pairs with surfaces in ebony or similar dark finishes.
Wurth Baer Supply categorizes this product under edgebanding and surfacing as PVC edgebanding, placing it among edge finishing materials for woodworking.
This Rehau, Inc. PVC ebony edgebanding, in 15/16 inch width, .018 inch thickness, and 600 foot length, gives fabricators a consistent material for finishing panel edges in dark-tone projects. The combination of thin profile, working-width margin, and extended roll length supports efficient cabinet and furniture production. When a project calls for an ebony edge treatment that aligns with panel-based construction, this edge banding from Wurth Baer Supply provides a defined option built around these specific dimensions.
Sold In: 1 Roll