Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC blackened steel matte edgebanding gives panels a finished edge by covering raw substrate with a PVC surface that matches blackened steel tones, which helps projects keep a consistent, modern look along every exposed edge. The .018 inch thickness provides a low-profile edge that sits tight to the panel, which matters when aligning doors, drawer fronts, or shelves where slight buildup could affect reveals. The 15/16 inch width works with common panel thicknesses where a small overhang is trimmed back, supporting a straight, flush edge after trimming. The matte finish keeps reflections down along the edge, which fits applications where a subdued, steel-inspired appearance is preferred. Supplied in a 600 ft length, this Rehau PVC edgebanding supports longer runs of cabinetry or casework from one coil, which helps maintain color and finish continuity from cabinet to cabinet on the job.
This PVC blackened steel matte edgebanding uses a 15/16 inch width to span the edge of typical casework panels with a small trim margin, which aids in achieving a flush edge after routing or trimming operations. The .018 inch thickness keeps the edge buildup minimal, which helps maintain smooth alignment with doors, drawer fronts, and adjacent panels where thicker material could introduce a visible step. With a total length of 600 ft per coil, this Rehau PVC edge banding roll supports continuous edging on long runs of cabinetry, closets, or other projects without frequent roll changes, which helps maintain workflow continuity on the bench or at the edgebander.
This edge banding, classified as Edgebanding & Surfacing in the Edgebanding, PVC category, is suited for projects that require a PVC edge treatment along exposed panel edges in cabinetry or similar woodworking applications, where PVC materials are standard. The blackened steel matte finish supports designs that call for a darker, steel-inspired edge tone, which works well with complementary surfaces that echo metal or dark laminate appearances. The 15/16 inch width offers coverage appropriate for many panel thicknesses used in casework, allowing a slight overhang that is later trimmed flush so the finished edge lines up cleanly with the panel face. Because the material is supplied in a 600 ft roll, it is well suited to shop environments handling series production or multi-cabinet jobs, where having a long, continuous supply of identical edgebanding reduces changes between coils during processing.
The .018 inch thick PVC construction of this Rehau edgebanding provides a controlled, repeatable edge profile along the length of the roll, which supports consistent trimming behavior from part to part. That consistent thickness helps edging equipment or hand trimming tools cut a predictable amount of material, which supports uniform edges and reduces variation in the finished reveal where doors and drawer fronts line up. The 600 ft length allows a large number of components to be edged from the same coil, which supports visual consistency because color, sheen, and texture remain the same across the run. Identified by manufacturer part number 716041-613, this specific PVC edgebanding can be matched to existing work specified with the same code, which helps maintain continuity on repeat projects or service replacements where the same blackened steel matte edge appearance is required.
This edge banding is made from PVC, which provides a stable, uniform edge surface that works well with standard edging equipment in woodworking shops.
The Rehau 716041-613 PVC edgebanding is .018 inch thick, which creates a low-profile edge that trims easily and helps keep panel transitions smooth.
This blackened steel matte PVC edge banding has a 15/16 inch width, providing full coverage for common panel edges with a small margin for trimming.
The roll length is 600 ft, allowing multiple cabinets or larger runs of casework to be edged from one coil for consistent color and finish.
The edgebanding has a blackened steel matte finish, giving edges a dark, steel-like appearance with reduced glare to suit modern designs.
This product is classified as Edge Banding in the Edgebanding & Surfacing, Edgebanding, PVC category, helping buyers identify it as PVC panel edging.
This Edgebanding, PVC Blackened Steel Matte .018 inch Thick, 15/16 inch Width x 600 FT from Rehau, Inc. provides a PVC edge solution that matches blackened steel tones on cabinetry or panels. The .018 inch thickness and 15/16 inch width support flush, low-profile edges after trimming, which keeps reveals and joints visually clean. With a 600 ft length and clear identification under manufacturer part number 716041-613, this edge banding suits shops and installers needing consistent blackened steel matte edges across multiple projects, making it a practical choice when planning steel-toned PVC edging runs.
Sold In: 1 Roll