Edgebanding PVC Sabbia 1mm identifies this Rehau, Inc. edge banding as a PVC-based solution in the Sabbia color, so it finishes exposed panel edges with a consistent look across the full project run. The 1mm thick construction provides a defined edge profile that helps cover minor edge imperfections on panels while maintaining a solid visual line. The 23mm width is sized to cover typical panel thicknesses with enough margin for trimming, which supports accurate flush finishing with standard edgebanding tools. The 328 ft length in a single roll gives installers and shops enough material for longer runs or multiple cabinets without changing rolls mid-job, which keeps setups and color transitions consistent. As an edge banding classified under Edgebanding & Surfacing, Edgebanding, PVC, it is intended to finish raw edges so panels present a completed appearance once trimmed and detailed.
The 23mm width of this PVC edge banding gives fabricators working room over standard panel thicknesses, so trimming operations can bring the edge back to flush without risking a short reveal. The 1mm thick profile offers a balance between a substantial edge and efficient processing, so it suits typical shop equipment for edgebanding and edge finishing. As a PVC edge banding product, it is intended to be applied along panel edges and then trimmed, which aligns with common casework and furniture production workflows. The Sabbia color allows installers to carry the same visual tone across doors, drawer fronts, and cabinet cases, so edges do not break the overall color scheme.
This edge banding is defined as Edgebanding, PVC within the Edgebanding & Surfacing category, so it is meant for finishing the exposed edges of panels in woodworking and similar projects where a PVC edge is desired. The 23mm width and 1mm thickness suit applications where standard-thickness panels need a finished edge that can be trimmed back for a flush face, which supports cabinet cases, shelving, and other panel-based constructions. The Sabbia color description ties the edge appearance to that specific tone, so projects that are designed around a Sabbia surface can extend that same color onto the edges for a coordinated finish. With a single 328 ft roll available, shops can plan production runs of matching components using one continuous length, which supports consistent color and material performance from the first piece to the last.
The Rehau, Inc. branding on this edge banding identifies a specific manufacturer source, which helps shops rely on the same PVC formulation and Sabbia color each time the material is ordered. The manufacturer part number 959491-271 ties directly to this 23mm x 1mm x 328 ft configuration, which simplifies specifying the correct banding in project documentation and shop orders. Because the product is described as Edgebanding, PVC, Sabbia 1mm Thick, 23mm Width x 328 FT, installers can match their setup to these dimensions, so trimming, routing, and handling routines can be standardized across jobs. The defined 1mm thickness helps tooling setups stay consistent from run to run, which supports predictable flush edges and reduces rework related to unexpected edge variation.
This edgebanding is 23mm wide and 1mm thick, which gives installers enough material to cover panel edges and trim back to a clean, flush finish.
The Rehau 959491-271 PVC edgebanding roll is 328 ft long, which supports extended production runs or multiple cabinet projects using the same material.
This 23mm width Sabbia edgebanding is made from PVC, which is suited to standard edgebanding application and trimming processes in cabinet and panel work.
The Sabbia description identifies the color tone of this PVC edgebanding, which helps align the edge appearance with surfaces using the same Sabbia design.
The 1mm thick PVC edge banding provides a solid edge profile that trims cleanly, helping create a defined transition between the panel face and the finished edge.
The manufacturer part number 959491-271 uniquely identifies this Sabbia 23mm x 1mm x 328 ft edgebanding, which supports consistent material selection and repeat ordering.
This Rehau, Inc. edge banding is defined as Edgebanding, PVC, Sabbia 1mm Thick, 23mm Width x 328 FT, so it delivers a known combination of material, size, and color across each roll. The 23mm width and 1mm thickness support standard edge trimming workflows, letting shops align their tooling to a predictable profile. With the Sabbia color clearly specified, projects using that tone can extend it to every exposed edge. When a job calls for this exact configuration, using the 959491-271 part number keeps the selection matched to the intended design and processing setup.
Sold In: 1 Roll