Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding PVC Graphite 1mm Thick 23mm identifies this product as a graphite-colored PVC edge banding sized for typical panel edges, so it provides a consistent finished edge along straight panel runs. The 23mm width is designed to cover common panel thicknesses with a slight overhang for trimming, which supports tight visual lines after edge processing. The 1mm thick construction gives a substantial edge layer that stands up to normal cabinet and furniture use, keeping exposed edges protected from everyday contact. The 328 FT length is supplied as a continuous roll, which lets you run multiple cabinet or furniture jobs from a single part number without constant roll changes. The PVC material defines it as a thermoplastic edgebanding, so it responds predictably to standard edgebanding equipment and trimming tools in a woodworking shop environment.
The 23mm width specification establishes how this Rehau PVC edgebanding fits along panel edges, giving fabricators enough coverage to apply and then trim flush to the board faces. The 1mm thick profile defines the material cross-section at the edge, which is useful for setting trimming tools and flush bits so they track cleanly without cutting into the face material. Because the product is described as PVC edgebanding, it works within the handling limits of thermoplastic edge materials under typical shop conditions, supporting standard edge-banding workflows. The 328 FT length in a single roll also influences setup, since it reduces roll changes during runs of similar panels and supports consistent tension and feed settings on edgebanding equipment throughout a job.
The product name "Edgebanding, PVC, Graphite 1mm Thick, 23mm Width x 328 FT" describes a roll-supplied edge treatment designed for closing off exposed panel cores in cabinetry and furniture. The 23mm width allows application on panels where the edge band is slightly wider than the substrate, supporting trimming for a seamless transition between the edge and faces. The 1mm thickness gives the edge enough body for common cabinet fronts, shelves, and vertical panels, so the finished work presents a defined edge line rather than a thin film. The graphite description sets a dark tone that can be paired with graphite-colored or complementary surfaces when designing casework or fixtures. With 328 FT in a roll, this PVC edgebanding supports multi-piece projects such as kitchens, built-ins, or commercial fixtures where the same edge detail repeats across many parts.
The 23mm width and 1mm thickness specified for this Rehau PVC edgebanding give fabricators known dimensions for repeat setups, which helps maintain consistent trimming and scraping settings across batches of workpieces. The continuous 328 FT length lets edgebanding machines run long sequences of panels under one configuration, reducing interruptions that could introduce minor alignment differences from roll changes. The graphite color designation provides a consistent visual reference when aligning edges on mitered or continuous runs, so installers can maintain uniform appearance around cabinet corners and across adjacent panels. Because the product is clearly identified as edge banding in the Edgebanding & Surfacing category and as a Product Class of Edge Banding, shops can assign it as the standard graphite edge treatment in their process documentation, supporting repeat orders and consistent finish on follow-up projects.
The Rehau 959491-312 item is PVC edgebanding in a graphite color, so it is used to cover and finish exposed panel edges in cabinetry and furniture projects.
This graphite PVC edge banding has a 23mm width, giving enough coverage to span standard panel thicknesses while allowing trimming for a flush, clean edge line.
The 1mm thickness specifies the edge layer size, so trimming and scraping operations can be set to leave a solid, defined edge profile on cabinet and furniture panels.
The Rehau PVC edgebanding roll provides 328 FT of material, supporting extended production runs where many cabinet or furniture parts share the same graphite edge.
This graphite edge banding is PVC, meaning it is a thermoplastic edge material suitable for processing with standard edgebanding and trimming equipment in woodworking shops.
The Rehau, Inc. brand and part number 959491-312 identify the exact graphite PVC edgebanding, helping shops align it with existing Rehau-based drawings or prior projects.
This Rehau, Inc. Edgebanding, PVC, Graphite 1mm Thick, 23mm Width x 328 FT combines known dimensions with a defined graphite tone, so it fits neatly into documented cabinet and furniture workflows. The 23mm width and 1mm thickness give installers predictable trimming behavior on standard panel constructions, while the 328 FT roll length supports consistent setup across extended runs. For shops standardizing on a graphite PVC edge detail from a named manufacturer, this 959491-312 edge banding provides a clearly specified option ready to assign to repeatable jobs.
Sold In: 1 Roll