Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau 1960 Bourbon Teak laminate gives you a defined Bourbon Teak surface in a single sheet, so you can skin panels, fixtures, or tops with a consistent decorative face. The .5mm thickness, captured in the SAP description as BOURBON TEAK .5MMX49X121, provides a thin surfacing layer that adds design without adding bulky build-up. The 49 inch by 121 inch sheet size, stated in the product name as 49"x121", spans common casework, cabinet, and panel dimensions in one run, which reduces seam layout on larger faces. As part of the Rehau HPL category, this laminate fits into projects that call for high-pressure laminate style surfacing from a recognized brand. The Rehau, Inc. brand identity gives installers and fabricators a clearly identified source, which supports repeat orders by finish name and number when matching existing work or planning future phases.
The 49"x121" dimensions in the product name describe a sheet large enough to span many cabinet, furniture, and millwork layouts without joint planning on every panel. This helps streamline cutting patterns when nesting parts on a single Bourbon Teak sheet. The .5mm thickness from the SAP description BOURBON TEAK .5MMX49X121 defines a thin surfacing layer, which affects how edges are built up and how this laminate transitions to other materials in a project. Because it is categorized as Laminate under Edgebanding & Surfacing|Rehau HPL, it slots into workflows already set up for HPL-style fabrication, so shops can use familiar processes while targeting this specific Bourbon Teak finish.
The category placement as Edgebanding & Surfacing|Rehau HPL positions this Rehau 1960 Bourbon Teak laminate for surfacing cabinet parts, fixtures, and other woodworking components that require a decorative layer. The 49" width gives enough coverage for full-height panels in many layouts, which can reduce offcuts on tall wardrobe or pantry sides. The 121" length supports long runs such as counters, tall dividers, or wide feature panels, so fabricators can orient parts along the sheet to match grain or pattern flow within the Bourbon Teak design. As a Laminate product, it is intended to be bonded to suitable substrates, placing the Bourbon Teak appearance on the working face of panels that form cases, doors, or interior architectural elements.
The precise SAP description BOURBON TEAK .5MMX49X121 ties thickness and size directly to the Bourbon Teak designation, giving shops a clear way to call out this exact sheet for repeat projects or service work. The .5mm stated thickness influences how closely edges, reveals, and inside corners can be detailed, which matters when aligning laminate edges to adjoining materials for clean visual lines. The manufacturer part number 335592-318 provides a stable reference for procurement and documentation, helping estimators and project managers specify the same laminate every time Bourbon Teak is required. Because the product is identified as Rehau 1960 Bourbon Teak laminate and tied to Rehau HPL, designers can note that exact naming on drawings, so the surfacing installed on site aligns with the specified finish across future reorders.
The Rehau 1960 Bourbon Teak laminate sheet is listed as 49"x121", giving fabricators a large panel to lay out tall sides, wide doors, or long fixtures with fewer seams.
The .5mm dimension in the SAP description BOURBON TEAK .5MMX49X121 indicates the laminate thickness, which affects edge build-up and transitions to other materials in a project.
This product is classified as Laminate in the Edgebanding & Surfacing|Rehau HPL category, aligning it with decorative surfacing work on woodworking and casework components.
This Bourbon Teak laminate is produced by Rehau, Inc., so shops can specify the Rehau brand when documenting finishes and sourcing matching material later.
The manufacturer part number 335592-318 uniquely identifies this Rehau Bourbon Teak laminate, helping purchasing teams and installers order the exact same sheet when repeating a finish.
Being in the Rehau HPL category signals that this laminate fits into HPL-style surfacing workflows, so shops can align Bourbon Teak finish choices with existing laminate processes.
The Rehau 1960 Bourbon Teak laminate, identified by part number 335592-318 and SAP description BOURBON TEAK .5MMX49X121, gives projects a clearly specified Bourbon Teak surfacing sheet. The 49"x121" format and .5mm thickness tie directly into laminate-based woodworking workflows. For work that depends on repeatable finish identification, documented by brand, category, and exact code, this Rehau HPL laminate provides a named option that can be specified and reordered by the same details across future jobs.
Sold In: 1 Sheet