Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau 154710 Smoke Stack laminate gives you a defined surfacing option in a 51 inch by 120 inch sheet, so larger cabinet or fixture faces can be handled in single runs with consistent appearance. This laminate is part of the Rehau HPL line, tying directly into a proven surfacing system that shops already recognize for coordinated projects. With a manufacturer part number of 334652-011, jobs that repeat or span multiple phases can reference the same material every time for predictable results. The sheet format lets you rough cut and process on standard woodworking equipment, helping it drop into existing shop workflows. At 0.9mm thickness, it provides a substantial decorative layer that stands up to typical woodworking handling while staying workable for trimming and edge detailing.
The Smoke Stack laminate in a 51 inch by 120 inch format lets fabricators nest parts efficiently across the sheet, which can cut down on offcuts when laying out door, drawer, and panel pieces. Its classification as laminate within the Rehau HPL group signals that it is intended for surfacing work, so it fits naturally into workflows that already use laminate presses or contact-bond setups. The 0.9mm thickness described in the SAP data supports clean edge treatment, because there is enough material to trim flush to core panels without feeling fragile during routing. With a single defined manufacturer part number, 334652-011, shops can tie ordering, stock tracking, and cut planning to one consistent sheet size for repeatable production.
The Rehau 154710 Smoke Stack laminate sits in the Edgebanding & Surfacing and Rehau HPL categories, positioning it for cabinet, fixture, and general woodworking surfacing tasks that call for a laminated finish. Its 51 inch width aligns well with tall cabinet panels, wardrobe ends, and similar vertical elements where a single sheet span reduces joint lines through the field. The 120 inch length accommodates long runs such as tall pantry sides or continuous wall panels, helping installers carry the Smoke Stack look across larger elevations. Because this product is defined as laminate and not raw core material, it plays the decorative surfacing role in an assembly, covering substrates that the shop already specifies for structure.
Within the Rehau HPL product class, this Smoke Stack laminate can be used wherever a high-pressure laminate sheet is expected in the build sequence, so tooling, presses, and handling routines already in place for HPL are directly relevant. The naming in the SAP description, SMOKE STACK .9MMX51X120 154710, ties the color identity and thickness together, supporting design teams who need that exact Smoke Stack tone documented on drawings. In practice, that means field crews and shop staff can speak in the same terms when referencing SMOKE STACK and 154710 during coordination, which helps keep material pulls consistent from job to job.
The clearly defined size of 51 inches by 120 inches lets project planners calculate sheet counts based on panel dimensions instead of working from generic assumptions, reducing surprises when cutting large components. The 0.9mm callout in the SAP description points to a laminate layer with enough body to handle trimming along edges during fabrication, which supports clean transitions at corners and panel perimeters. With the manufacturer part number 334652-011 tied to this Smoke Stack sheet, purchasing can reliably reorder the same product so finished runs remain visually consistent across phases or matching remodels.
Placement of this item in the Rehau HPL category signals compatibility with workflows already using high-pressure laminate sheets, so shops that standardize on Rehau HPL can fold this Smoke Stack option into their existing material sets. The product class designation as laminate clarifies that its role is as a surfacing material over core boards, keeping the division between structural substrate and decorative face clear during engineering and estimating. Because Wurth Baer Supply lists it specifically as WBSC - 1432 - RU334652-011, internal references, quotes, and job costing can anchor on a stable identifier, supporting accurate repeat ordering and consistent project documentation.
The Rehau 154710 Smoke Stack laminate is specified as a 51 inch by 120 inch sheet, allowing layout of larger panels and tall cabinet components from a single piece.
The Smoke Stack laminate is identified in the SAP description as 0.9mm thick, giving a substantial decorative layer that supports typical trimming and routing during fabrication.
This Smoke Stack item is listed as Laminate within the Edgebanding & Surfacing category and specifically under Rehau HPL, indicating its role as a surfacing sheet material.
Manufacturer part number 334652-011 identifies this specific Rehau Smoke Stack laminate sheet, so repeat projects can call out the same material consistently in documentation.
The 51 by 120 inch size lets shops cut tall sides, doors, or wall panels from one sheet, reducing seams across visible surfaces on cabinet and fixture projects.
The 154710 designation in the SAP description ties directly to the Smoke Stack color and size, helping designers and buyers specify the exact laminate for coordinated work.
Choosing the Rehau 154710 Smoke Stack laminate in the 51 inch by 120 inch, 0.9mm format lets your shop align design intent, estimating, and fabrication around a defined HPL sheet. With clear identifiers like 334652-011 and 154710, coordinating between drawings, purchasing, and production remains straightforward. For projects that call for a Smoke Stack surfacing look within the Rehau HPL family, this laminate provides the specific size and thickness needed to plan cuts, handle panels, and deliver consistent finished surfaces.
Sold In: 1 Sheet