Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
ACACIA OAK 19.5MMX49"X121" panel identifies a Rehau, Inc. melamine board sized for cabinetry, so it gives installers a predictable sheet dimension for ripping cabinet sides, tops, and shelves to consistent sizes. The 19.5MMX49X121 PB 2S description specifies a 19.5 mm thick particleboard core with two melamine surfaces, which creates a stable sheet for machining while presenting the same finished face on both sides of a component. Being categorized as Board Panel Products|Melamine defines it as a decorative melamine panel, so it serves when a hard, factory-applied surface is preferred over on-site finishing for repeatable appearance. The Rehau, Inc. brand and Rehau product class link this sheet to a known manufacturer line, which helps shops standardize material choices across multiple projects. The Manufacturer Part # 319613-217 ties this exact ACACIA OAK design to ordering and reordering.
The 19.5MMX49X121 PB 2S panel format sets clear boundaries for cabinet layout because installers know each sheet is 49 inches by 121 inches before cutting, which shapes how tall pantry sides or wardrobe components can be cut from a single board. The 19.5 mm particleboard core thickness supports hardware layout because hinge cup drilling and drawer runner mounting can be planned around that build, helping keep fastener penetration where expected. The melamine classification describes a hard, factory-applied surface on both sides of the core, so installed parts share the same finished feel inside cabinets and on exposed faces. The Manufacturer Part # 319613-217 provides a stable identifier, so matching panels can be ordered again when additional cabinets or replacement components are needed later.
The ACACIA OAK 19.5MMX49X121 PB 2S description positions this sheet as a melamine board panel, which suits cabinet and casework components that benefit from a finished face straight off the sheet. The 49 inch width and 121 inch length support tall cabinet sides and wardrobe panels because many vertical members can be nested within that footprint. The 19.5 mm particleboard core thickness suits structural case parts such as sides, bottoms, and fixed shelves, since the core description points to a panel intended as a board rather than a thin skin. Being part of the Board Panel Products|Melamine category links it to construction using standard panel-processing equipment, so saws and routers that handle sheet goods can be set up around this consistent size.
The Rehau, Inc. brand and Rehau product class anchor this ACACIA OAK panel in a defined line, which helps fabricators keep color and surface selections consistent when combining this board with other Rehau materials on the same project. The PB 2S labeling indicates a particleboard core with two finished sides, so parts stay visually consistent whether a cabinet interior or exterior face is exposed after installation. The 19.5 mm thickness supports repeatable machining, because tool paths for grooves, dados, and hinge cups can be standardized around that build across multiple runs. The 49X121 dimensioning supports layout efficiency, since designers can plan cut lists and part nesting around that fixed sheet size to streamline panel processing. The specific Manufacturer Part # 319613-217 ties all of these details together in one reference, helping shops align drawings, purchase entries, and material pulls to the same ACACIA OAK melamine board.
The ACACIA OAK 19.5MMX49X121 PB 2S description identifies a 19.5 mm thick particleboard core panel, sized 49 by 121 inches, with melamine applied on both sides for finished cabinet components.
This panel is identified under the Rehau, Inc. brand and Rehau product class, so it matches other Rehau surfaces when a coordinated material program is required on a project.
The 19.5 mm thickness provides a stable board build, allowing hinge cups, grooves, and structural joints to be dimensioned around that panel thickness for repeatable cabinet construction.
The 49 by 121 inch panel size gives shops a large sheet for nesting tall cabinet sides, shelves, and tops, supporting efficient layout and cutting on panel saws or CNC equipment.
PB 2S indicates particleboard with two melamine faces, so cabinet interiors and exteriors cut from the sheet share the same finished surface, simplifying orientation during assembly.
The Manufacturer Part # 319613-217 links drawings, ordering, and reorders to this exact ACACIA OAK melamine board, helping maintain material consistency across phases of a job.
The ACACIA OAK 19.5MMX49"X121" panel from Rehau, Inc., identified as 19.5MMX49X121 PB 2S with Manufacturer Part # 319613-217, gives shops a defined melamine board for cabinet and casework runs. The Board Panel Products|Melamine classification, combined with the Rehau product class, ties this sheet to standard panel processing workflows where a finished face is needed off the saw. Using this specific ACACIA OAK PB 2S board keeps thickness, sheet size, and surface type consistent from design through installation, so projects can be planned and repeated around a stable material reference.
Sold In: 1 Sheet