WB SUPERHANG 1-2K TC CLR 30SHEEN-GAL is a Renner clear topcoat in the SUPERHANG family, so it serves as a transparent finishing layer that protects and visually defines your wood surfaces. This product sits in Renner's clear topcoats category, meaning it is designed specifically as a final coat over properly prepared substrates rather than as a stain or primer, which helps streamline product selection on finishing jobs. The 30 sheen designation indicates a low to mid-sheen appearance, giving projects a controlled, consistent gloss that supports uniform results across cabinet runs and panel work. The product is identified as WB, denoting a water based system that fits shops looking to work with water borne technology as part of their finishing process. The one-gallon size supports small production runs, touchups, or jobsite finishing where handling large volumes is not practical.
As a clear topcoat in the Solvents, Stains & Finishes category, WB SUPERHANG 1-2K TC CLR 30SHEEN-GAL occupies the finishing step after the substrate is prepared and, when used, stained or sealed, so it fits naturally as the last protective layer in a coating build. Its position in the Topcoats product class means it is intended to be the exposed film that takes day-to-day wear, simplifying decisions about where it belongs in a shop's process flow. Being water based, signaled by the WB prefix, this coating supports finishing environments that operate around water borne systems, which can influence equipment choices and cleanup routines on the finishing line. The 30 sheen attribute provides a fixed appearance target, which helps finisher teams communicate finishing standards and visually match existing work when jobs repeat.
WB SUPERHANG 1-2K TC CLR 30SHEEN-GAL, identified by Renner RRYO30765NTR-GAL and manufacturer part YO-30U765/-NTR-389, gives shops a clearly defined product when specifying or reordering the same finish across multiple jobs. As part of Renner's clear topcoats line, it is oriented toward protecting and finishing wood or similar substrates within a coating system where appearance and surface film are managed in distinct stages. The WB designation ties it to water based finishing lines, aligning it with workflows that already use water borne sealers or basecoats so that the topcoat remains within the same general technology family during application. The 30 sheen rating sets it up for projects where a moderate, controlled sheen is the visual target, which suits applications needing a refined look without a full high-gloss appearance. Because it is supplied in a gallon size, it works well for cabinet shops, millwork producers, or on-site finishing teams that process a steady but manageable volume of parts under one finish standard.
The specific naming WB SUPERHANG 1-2K TC CLR 30SHEEN-GAL anchors this product to a repeatable specification, so foremen and finishers can reference an exact clear topcoat when matching past work or documenting finishing schedules. The Renner branding connects the topcoat to a single coatings manufacturer, which simplifies internal inventories by tying one finish standard to an identifiable source. Labeling it as a topcoat in the Solvents, Stains & Finishes category differentiates its role from stains or primers, helping crews organize product racks and process steps so that each coating is applied at the correct position in the workflow. The clear designation means color development happens in earlier stages of the system, allowing this coat to focus on protection and surface look, which reduces variables when dialing in stain colors or substrate character. The 30 sheen value acts as a visual reference point for the final film, providing a consistent specification that estimators, designers, and finish room staff can refer to when describing finished surfaces to clients or reproducing existing jobs.
WB SUPERHANG 1-2K TC CLR 30SHEEN-GAL is a Renner clear topcoat in the Solvents, Stains & Finishes category, so it serves as the final protective and appearance layer in a finishing system.
The 30 sheen designation indicates a moderate sheen level, providing a controlled, uniform appearance that helps projects avoid overly glossy surfaces while still looking finished and consistent.
This Renner product is a clear topcoat rather than a stain, so it is used over prepared or colored substrates to protect the surface and define sheen without changing the base color.
The WB designation indicates a water based system, aligning this topcoat with water borne finishing environments and processes that are set up around that technology.
The gallon size of WB SUPERHANG 1-2K TC CLR 30SHEEN-GAL supports cabinet shops and finishing teams that run small to medium batches, balancing usable volume with easy handling and storage.
The codes RRYO30765NTR-GAL and YO-30U765/-NTR-389 precisely identify this specific Renner topcoat, aiding accurate reorders and consistent finish specifications across different jobs or locations.
Choose WB SUPERHANG 1-2K TC CLR 30SHEEN-GAL when a Renner water based clear topcoat with a defined 30 sheen fits your finishing schedule. The clear, product-classified topcoat role and identifiable part numbers support consistent, repeatable results on ongoing wood finishing work.
Sold In: 1 Gallon