Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Compact 33 edge mount mounting plate from Blum, Inc. is a zinc die-cast plate for concealed cabinet hinges that supports 1-1/2 inch overlay on face frame cabinets, so doors align to that overlay dimension when set up correctly. The plate is nickel-plated, which provides a hard metallic surface that stands up to normal cabinet use and helps maintain a consistent appearance with other nickel-finished hinge components. This plate is part of a two piece assembly with the concealed hinge, so each component can be handled separately during layout and mounting. The design works with concealed face frame hinges in the Compact 33 family, giving you a plate matched to that hinge geometry. A 1/2 inch cup depth specification in the related hinge setup defines how deep the hinge cup is bored in the door, which helps you plan your drilling and door construction around the intended hardware system.
The Compact 33 edge mount mounting plate supports plus or minus 9/64 inch height adjustment, which lets you shift the door up or down relative to the face frame after the hinge is mounted. This range is useful for aligning adjacent doors and setting reveals without redrilling. The plate also works with a hinge that provides minus 1/8 inch side adjustment, so you can bring the door closer toward the hinge side within that range to fine-tune gaps between doors or between door and frame. With 1-1/2 inch overlay capability, the plate positions the door to cover that amount of the face frame, which is important when matching existing cabinet layouts or designing consistent overlays across a run of cabinets.
This Compact 33 concealed hinge plate is used on face frame cabinets where a 1-1/2 inch overlay is required, so the door covers that distance across the face frame when hung. It is classified under concealed cabinet hinges and is designed for use in concealed face frame hinge applications, so the hardware stays largely hidden when the door is closed while still delivering a functional swing. The side or face mount capability means you can mount the plate to the frame edge or front, which is useful when working with different frame widths or construction methods. The 45 mm boring pattern matches standard drilling layouts found in many cabinet shops, helping the plate interface with existing boring machines or jigs that are already set to that spacing.
The 110 degree opening angle of the hinge system supported by this plate gives doors a broad swing, which helps during installation when accessing interior adjustments and during daily use when reaching into the cabinet. The plus or minus 9/64 inch height adjustment built into the hinge and plate interface allows fine-tuning door position after mounting, which helps bring multiple doors into line along a continuous face frame without reconstructing the cabinet. The minus 1/8 inch side adjustment lets you shift the door closer toward the hinge side, which is valuable for dialing in side gaps or addressing small layout variances. Nickel-plated zinc die-cast construction keeps the plate rigid under load, helping the hinge maintain its set position once adjusted. Being a two piece assembly means the hinge can detach from the mounted plate, so doors can be removed and reinstalled while preserving the plate position on the cabinet for repeatable alignment.
The Compact 33 edge mount mounting plate is used with concealed face frame hinges on face frame cabinets, so it supports applications where the hinge hardware is largely hidden when the door is closed.
The Compact 33 edge mount mounting plate is specified for a 1-1/2 inch overlay, so cabinet doors are positioned to cover that amount of the face frame when the hinge system is set correctly.
The Compact 33 plate works with plus or minus 9/64 inch height adjustment, allowing the door to move up or down to line up reveals and match adjacent doors on the same face frame run.
The Compact 33 hinge system offers minus 1/8 inch side adjustment, letting the door shift toward the hinge side to fine-tune side gaps between doors or between door and frame.
The Compact 33 concealed hinge system used with this mounting plate provides a 110 degree opening angle, giving a wide door swing that improves cabinet access and hinge adjustment access.
The 45 mm boring pattern on this plate matches standard concealed hinge drilling layouts, helping it integrate with hinge boring equipment and maintain consistent alignment across cabinet doors.
The Compact 33 edge mount mounting plate, part number 06943633 from Blum, Inc., brings together a 1-1/2 inch overlay rating, 110 degree hinge opening angle, and adjustable height and side positioning. For face frame cabinet runs using concealed hinges, these specifics help set consistent overlays and door gaps along the entire installation. When you need a nickel-plated, zinc die-cast plate with a 45 mm boring pattern for side or face mounting, this Compact 33 plate offers the defined geometry and adjustment ranges needed for precise hinge layout work.
Sold In: 1 Each