Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the Blum STANDARD series 10 inch epoxy-coated Euro roller slide in cream, a 3/4-extension, self-closing steel slide for small-drawer cabinetry where the finish needs to blend into a cream or off-white interior. One complete slide for one drawer side, non-handed, on nylon roller bearings.
The 10 inch length is the right call for shallow upper cabinets, bathroom vanity drawers, small utility compartments, and narrow island drawers where interior depth tops out around 10 inches. A longer slide would overhang the back of the cabinet or crowd out rear hardware; this length lands cleanly in short boxes. The self-closing ramp keeps the drawer shut on its own, which matters in a busy bathroom or a pull-out spice rack that gets opened and nudged dozens of times a day. At 3/4 extension, the rear inch or two of the drawer stays inside the cabinet at full open — appropriate for small drawers where contents are accessed from the front anyway.
The cream epoxy powder-coat is baked onto the steel member, giving the slide a color that reads neutral against cream melamine, off-white thermofoil, and light-toned wood interiors. Where a white slide would stand out against a warmer interior, cream disappears. The steel construction handles the slide's standard-duty load class; roller bearings are the industry standard for this Euro format, trading ball-bearing smoothness for a quieter, more economical solution well suited to light cabinet drawers. The epoxy finish is a color and surface choice, not a structural upgrade — the slide performs in dry, indoor cabinet environments.
Cabinet shops standardized on cream-interior casework reach for this slide when they need the 10 inch length to match a shallow box spec. Renovation contractors refacing or refreshing older kitchens with cream interiors will find this the easiest color match on the market. Homeowners replacing a single worn slide in a cream-finish cabinet can order one part without hunting for an exact match at a home center. The non-handed format and simple screw-on installation make it a practical stock item for any shop running cream-interior builds at volume.
No. This slide self-closes on a built-in ramp — once the drawer is pushed within the capture zone, the ramp pulls it fully shut. There is no damper, so the close is positive rather than slowed. Soft-close is a separate, damped mechanism this slide does not include.
Not exactly. Cream reads warmer and slightly yellow-toned compared to bright white. If your cabinet interior is white melamine or white thermofoil, use the white version of this slide for the closest color match. Cream suits off-white, almond, and warm neutral interiors.
This is a 3/4-extension slide, so the drawer travels approximately three-quarters of the slide length before reaching the stop. The rear portion of the drawer remains inside the cabinet at full open. It is not a full-extension or full-access slide.
No. This slide is non-handed — one part number works on either side of the drawer. Order two of the same SKU to outfit one drawer, one for each side.
The STANDARD series epoxy slide is designed for frameless cabinet installations. In face-frame cabinets, rear mounting support is typically required; confirm the bracket requirement before ordering for face-frame work.
When the drawer is shallow and the interior is cream, this Blum STANDARD 10 inch roller slide covers both constraints cleanly — self-closing action, the right length, and a finish that blends rather than contrasts.
Sold In: 1 Set