Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the Blum STANDARD 230 series 10 inch epoxy-coated Euro roller slide in white — a 3/4-extension, steel roller-bearing slide with a self-closing ramp, sized for shallow drawers in vanities, base cabinets, and closet casework where a white interior finish is the standard.
The 10 inch length targets the shallow end of the cabinet drawer range — bathroom vanity drawers, narrow utility drawers in base cabinets, and accessory drawers in closet systems are the natural fit. In any of these applications the drawer depth is short, and a longer slide would run past the available interior. The white finish is especially practical in vanity and linen-cabinet work, where white melamine or painted interiors are the norm and a cream or almond slide would read as off-color against the box sides.
This is also a practical choice for production runs where a single non-handed SKU handles every position in the cabinet — no left-right sorting, no mispicks on the assembly line.
The white epoxy powder coat is baked onto the steel members, giving a smooth surface that resists chipping under normal handling and stays color-stable over the slide's service life. The color is true white — not cream or almond — so it coordinates with white melamine box sides and white-painted cabinet interiors without a visible mismatch at the opening. Nylon roller bearings carry the drawer along the epoxy tracks quietly, with no metallic scrape on operation.
Cabinet shops running white-interior vanities and bath cabinets will find this the straightforward answer for any drawer under roughly 10 inches deep. Designers specifying hardware for white-box closet systems can call out this slide to keep the interior monochromatic. Homeowners replacing worn slides in an existing white-interior cabinet get a direct color match without special ordering. The 3/4-extension travel is appropriate for any of these situations — the contents of a shallow vanity drawer are reachable without needing full rear access.
The Motion Technology attribute on this SKU is listed as soft-close; however, the Blum STANDARD 230 series is an epoxy roller slide with a self-closing ramp, which is an undamped positive close — not a damped soft-close. Confirm the exact closing behavior with your Blum representative or the published 230 series data sheet before specifying where a damped close is required.
No. This slide is non-handed — the same part installs on either side. One SKU covers both sides of the drawer.
At 3/4 extension, travel is roughly three-quarters of the slide length — the back portion of the drawer remains inside the cabinet at full open. For a 10 inch slide, expect the front section of the drawer to clear the opening while a few inches at the rear stay inside.
Euro roller slides typically require rear mounting sockets in face-frame cabinets because the cabinet side is set back from the face frame. Confirm the correct rear socket for the Blum 230 series before ordering for face-frame work.
A confirmed load rating for the Blum STANDARD 230 series is not available in the current product data. Consult the Blum 230 series data sheet or your Blum representative for the rated capacity before specifying for loaded drawers.
When the interior is white and the drawer is shallow, this 10 inch Blum STANDARD 230 slide closes out the spec cleanly — correct color, correct length, correct motion for everyday residential cabinet work.
Sold In: 1 Set