Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The MUV Plus Drilling Jig is a dedicated installation tool for Knape and Vogt's MUV undermount drawer slide program, designed to locate and bore locking-device holes accurately so every drawer seats and releases the way the system intends.
Undermount slides depend on precise locking-device placement. When the bored holes are off, the drawer box either won't seat on the slides at all or seats at an angle that no amount of front adjustment corrects. The MUV Plus Drilling Jig removes that variable by holding the bit in the exact position the MUV locking device requires, referenced consistently against the drawer box. The result is a drawer that drops onto its slides and locks cleanly, with front adjustment available for fine-tuning rather than compensating for a bore error.
This jig is built for the MUV undermount program from Knape and Vogt. Locking devices, front fixings, and drilling templates in undermount programs are engineered per brand and per series — this tool is not interchangeable with drilling jigs for other undermount systems. If you're running MUV Plus slides, this is the correct jig; if you're running a different undermount line, use that line's specified template.
Cabinet shops running MUV Plus slides in production will get the most from this jig — the time saved across a multi-drawer kitchen or bath project adds up quickly when every box goes in right the first time. Installers fitting individual replacement drawers benefit from the same accuracy without needing to transfer measurements by hand. The jig is equally useful for a one-box repair and a fifty-box run; accurate hole placement matters regardless of volume.
This drilling jig is designed specifically for the MUV Plus program. KV's other undermount series use different locking-device geometries and require their own templates — do not assume this jig transfers across KV lines without confirming the hole pattern matches.
Confirm the drawer side thickness your MUV Plus slides require before drilling. The MUV program offers versions for different side thicknesses, and the jig should be used with boxes built to the slide's published specification.
Most shops keep it at the drill press or CNC staging area and use it drawer after drawer. Because it references a consistent datum, there's no per-box setup once your process is dialed in.
Yes — the jig places the locking-device holes accurately so the drawer seats correctly. Fine adjustment of the front face is done through the MUV locking device's built-in adjustment range after the drawer is hung.
Get the bore right the first time on every MUV Plus drawer box, and front adjustment becomes fine-tuning rather than damage control — that's the straightforward case for keeping this jig in the rotation.
Sold In: 1 Each