FormWood Mahogany Wood Veneer Edgebanding 7/8" x 3 mm, Unfinished, 328', NG3MMMAA 7/8

7/8" Mahogany Backed Thick EB For Clean Edges

7/8" mahogany backed thick EB gives you a dedicated edge banding solution for projects calling for mahogany appearance and a thicker, backed construction. As an edge banding, it covers exposed substrate edges so panels present a consistent mahogany face at the perimeter. The 7/8 inch width provides coverage for common panel thicknesses used in cabinetry and casework, helping hide core material while leaving room for trim and flush operations. The thick EB construction gives added material at the edge, supporting sanding and finishing steps without cutting straight through to the core too quickly. The backed design supports the mahogany facing during handling and application, which helps maintain a uniform look across cabinet runs, shelves, and furniture pieces that rely on surfaced panels.

Key Mahogany Edge Banding Details That Matter

• The 7/8 inch width works along exposed panel edges, providing enough coverage to align, trim, and flush the banding so panel edges visually match the field surface in finished cabinet or furniture assemblies.
• The mahogany backed thick EB construction provides a mahogany-facing banding with backing support, which helps the edge material handle machining and finishing steps while aiming for a consistent appearance at doors, tops, and case fronts.
• The edge banding product class means this strip is made specifically to cover raw panel edges, so it fits naturally into woodworking workflows where cut-to-size panels from surfacing materials need a finished mahogany edge.
• The association with Formwood and the designation DORMAGY78-3R identify this banding as a FormWood offering, helping shops match part ordering and shop documentation when repeating mahogany jobs or replacing existing edge details.

Applying Mahogany Backed Thick EB On Panels

The 7/8 inch mahogany backed thick EB format works along straight panel edges used in cabinetry, casework, and similar assemblies, so installers can line the banding to the panel face and then trim flush. As a wood edge banding classified product, it is meant to be applied where panel cores or cut edges would otherwise show, supporting projects that use laminate or wood surfacing while needing matching edges. The thicker, backed construction supports machining steps such as trimming and light sanding at the edge, giving fabricators working material as they dial in reveals and joints on doors, shelves, and carcass edges.

Using This FormWood Edge Banding In The Shop

Where Mahogany Backed Edge Banding Fits Best

This 7/8 inch mahogany backed thick EB sits in the Edgebanding & Surfacing category under Edgebanding, Wood, placing it squarely in woodworking environments that rely on surfaced panels. In cabinet shops and fabrication settings, that classification signals a role at the perimeter of panels rather than on broad surfaces, so it fits well on cabinet sides, tops, bottoms, and shelves where cut edges need a mahogany tone. The mahogany backing-focused description associates this banding with panel work that visually ties to mahogany-colored components, allowing runs of casework or furniture pieces to carry the same character at the face and the edge. Because the product is defined as thick EB, it offers extra resource at the edge, giving room for edge processing while maintaining a mahogany presentation around doors, partitions, or end panels in built-ins and similar installations.

Details That Support Repeatable Edge Banding Results

The manufacturer part number NG3MMMAA 7/8 identifies this mahogany backed thick EB precisely, which helps shops specify the same edge banding on repeat runs of a job and maintain uniform edges across replacement or additional panels. The Wurth Baer Supply listing as 7/8" MAHOGANY BACKED THICK EB, Formwood Industries Inc DORMAGY78-3R ties the part to FormWood, allowing project documents and purchase records to call out a consistent source for future work. The defined 7/8 inch banding width gives fabricators a predictable margin when setting up trimmers and sanding operations, supporting stable setups from batch to batch. With its role as edge banding made for wood-oriented surfacing workflows, this strip supports a predictable sequence: cut panels, apply the mahogany backed thick EB to raw edges, then trim and finish to align with surrounding mahogany-influenced surfaces.

Common Questions About This Mahogany Edge Banding

Choose Mahogany Backed Thick EB For Panel Edges

The 7/8 inch mahogany backed thick EB from FormWood provides a defined edge banding option when panel projects call for a mahogany-oriented appearance at exposed edges. With its 7/8 inch width and thick EB construction, it supports trimming and light sanding while keeping the mahogany-facing layer at the perimeter. The clear identification as NG3MMMAA 7/8 and DORMAGY78-3R through Wurth Baer Supply helps shops specify and repeat this choice on cabinet, casework, and furniture runs that rely on mahogany-style edges.