Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding 4149E5 Beige Wppd describes a Doellken Woodtape edge banding in a beige wood pattern, which finishes raw panel edges so exposed cores are covered and visually aligned with the surface. The .018 inch thick material establishes a low-profile edge, which keeps the transition from face to edge subtle on casework and shelving. The 15/16 inch width is sized to cover standard panel thickness with slight overhang, which supports flush trimming for a straight finished edge. This product is classified as PVC edgebanding, which provides a work-ready edge solution within the Edgebanding & Surfacing category. The manufacturer part number 4149E5-1518-1 gives installers a precise identifier, which reduces errors when matching existing beige wood patterned runs across multiple jobs or future repairs.
The 15/16 inch width on this Doellken Woodtape edgebanding extends slightly past common panel thicknesses, which leaves room for trimming tools to create a straight, chip-free edge. The .018 inch thickness keeps the material relatively thin, which helps it follow the panel edge line closely so transitions remain modest after trimming. Being categorized as PVC edgebanding defines it as a surfacing edge solution, which fits typical woodworking and cabinet panel workflows that rely on banded edges instead of exposed cores. The SAP description "15/16X.018 EB, BEIGEWPPD 600FT/RL" indicates the dimensional format and Beige Wppd identification, which supports consistent use across production runs where repeatable sizing and color reference are important.
This Doellken Woodtape edge banding falls under the Edgebanding & Surfacing category as PVC edgebanding, which situates it well for cabinetry, store fixtures, and similar panel-based projects where raw edges need to be concealed. The Beige Wppd description points to a beige wood pattern, which aligns the edge color and pattern with light, wood-look faces on doors, drawer fronts, and case interiors. The 15/16 inch width gives coverage that suits common panel dimensions, which helps maintain a consistent appearance when multiple edges across a cabinet run are finished with the same banding. The combination of pattern identification 4149E5 and part number 4149E5-1518-1 lets shops specify the same look across different jobs, which supports repeatable visual results when replacing or adding panels later.
The .018 inch thick construction establishes a lean cross-section, which means the edge banding does not build excessive thickness at the edge and therefore maintains a smooth hand-feel along cabinet doors and shelving. Paired with the 15/16 inch width, this sizing gives fabricators room to trim both faces, which promotes a uniform edge line even if panels vary slightly from nominal thickness. Classifying the product as Edge Banding and PVC edgebanding defines it as part of a dedicated edge finishing system, which helps shops standardize tooling and workflow around a known material type. The clear SAP description and manufacturer part number connect the beige wood pattern and sizing in a single reference, which streamlines reordering and reduces time spent matching finishes across multiple workcells or locations.
Edgebanding 4149E5 Beige Wppd is .018 inch thick and 15/16 inch wide, which suits standard panel edges and allows trimming back to a clean, flush finish on cabinets and casework.
This Doellken Woodtape product is classified as PVC edgebanding in the Edgebanding & Surfacing family, which places it among common edge solutions used on panel-based woodworking projects.
The Beige Wppd designation identifies a beige wood pattern, which helps align the edge appearance with light wood-look surfaces so panel faces and edges present a coordinated look.
The .018 inch thickness keeps the banding relatively thin, which limits edge build-up and supports smooth trimming so edges remain comfortable to the touch on finished panels.
Part number 4149E5-1518-1 ties the Beige Wppd pattern and 15/16 x .018 inch size together, which helps shops reorder the same appearance and dimensions for consistent results.
The 15/16 inch width extends beyond typical panel thickness, which provides extra material for trimming tools to cut back to a straight, chip-free edge on both faces.
Choose Edgebanding 4149E5 Beige Wppd from Doellken Woodtape when a beige wood-pattern PVC edge is needed to finish panel projects within the Edgebanding & Surfacing class. The .018 inch thickness and 15/16 inch width support clean trimming and consistent edges across cabinets, shelving, and similar builds. Referencing the 4149E5-1518-1 part number connects the Beige Wppd look with its defined size, which keeps ordering aligned with shop drawings and finish schedules for repeatable panel runs.