Smoked Knotty Ash Edgebanding, 3mm Thick, 15/16" Width x 300 FT

Smoked Knotty Ash Edgebanding For Finished Edges

Smoked Knotty Ash edgebanding from Rehau, Inc. is a PVC edge banding designed to cover and protect raw board edges, so cabinet and furniture projects present a consistent smoked knotty ash look from face to edge. The 3mm thick construction provides a substantial edge profile that stands up to everyday use, while giving machinists enough material for clean trimming and light profiling. The 15/16 inch width is sized to cover common panel thicknesses with a bit of overhang, which supports accurate flush trimming in a standard edgebander or with hand tools. The 300 FT length is suited to shop runs where consistent color and pattern across multiple parts reduces visual variation between doors, drawer fronts, and panels. As a PVC edgebanding in a smoked knotty ash design, it supports projects that call for that specific appearance without sourcing solid wood stock.

Key Smoked Knotty Ash Edgebanding Details For Shops

• The 3mm thick PVC construction creates a robust edge that tolerates typical handling in cabinets and casework, which gives installers confidence when trimming and fitting parts on site.
• The 15/16 inch width provides coverage for standard panel thicknesses with trim allowance, so operators can run parts through edgebanders and achieve clean, flush edges with normal setups.
• The 300 FT roll format supports production runs of doors, drawer fronts, and panels, helping maintain the same smoked knotty ash appearance across multiple components in a project.
• The Smoked Knotty Ash design in PVC edgebanding allows shops to match this specific look on exposed edges, supporting design continuity between faces and edges on finished pieces.
• The Rehau, Inc. brand and manufacturer part number 301021-681 give shops a clear reference for reordering the same Smoked Knotty Ash edgebanding when repeating jobs or matching existing work.

Edge Banding Dimensions That Support Clean Fit

This Smoked Knotty Ash edgebanding is specified at 3mm thick, which gives enough material for reliable trimming and slight profiling without feeling fragile at the edge. That thickness supports stable feeding through typical edgebanders and helps reduce edge damage during handling. The 15/16 inch width is chosen to cover the edge of standard sheet goods while leaving a small amount to trim, which is important for producing flush, chip-free edges after routing or scraping. With a 300 FT length, a single roll can serve multiple cabinets or a series of casework pieces, limiting color breaks and allowing shops to edge many parts before changing rolls.

Using This PVC Edgebanding In Woodworking Projects

Where Smoked Knotty Ash Edgebanding Fits Best

This Rehau Smoked Knotty Ash edgebanding is a PVC edge banding suited for woodworking projects where the design calls for a smoked knotty ash appearance on exposed edges. As a 3mm thick product, it works well on cabinet boxes, shelves, and furniture panels that benefit from a more substantial edge than very thin banding. The 15/16 inch width aligns with common panel dimensions used in cabinetry and casework, so it integrates into typical shop workflows for edging doors, drawer fronts, and carcass parts. Because the edgebanding is supplied in a 300 FT length, it supports runs where a consistent smoked knotty ash look is desired across multiple components, which is valuable for kitchen layouts, built-ins, or commercial millwork using this decor.

Details That Support Repeatable Edge Banding Results

The combination of 3mm thickness and PVC material gives this Smoked Knotty Ash edgebanding enough body for stable tracking through edge banding equipment, which can help produce uniform glue lines and smooth trimmed edges. The 15/16 inch width provides working tolerance for standard panel edges, letting operators set machines for light overhang and then trim back to a clean, flush finish. Identifying the product by the manufacturer part number 301021-681 allows shops to specify the same edgebanding in future runs, which supports consistent appearance when adding cabinets or replacing components in an existing installation. As an edge banding from the Edgebanding & Surfacing category, it plays the role of finishing and protecting raw edges so boards present a continuous smoked knotty ash design.

Common Questions About Smoked Knotty Ash Edgebanding

Choose This Roll For Smoked Knotty Ash Edges

The Smoked Knotty Ash edgebanding from Rehau, Inc. combines 3mm thickness, 15/16 inch width, and a 300 FT length to support cabinet and furniture edge finishing where this specific smoked knotty ash look is required. The PVC construction and defined dimensions align with common woodworking workflows, giving shops a clear, repeatable solution for edging panels in this decor. For projects built around a smoked knotty ash design, this Edge Banding product provides the matching edge treatment so faces and edges present a unified appearance.